Morphology development in layered silicate thermoset nanocomposites

被引:86
作者
Tolle, TB [1 ]
Anderson, DP
机构
[1] USAF, Res Lab, Mat & Mfg Directorate, Wright Patterson AFB, OH 45433 USA
[2] Univ Dayton, Res Inst, Dayton, OH 45469 USA
关键词
nanocomposite;
D O I
10.1016/S0266-3538(02)00039-8
中图分类号
TB33 [复合材料];
学科分类号
摘要
The role of processing temperature on the morphology development of organically modified montmorillonite-epoxy nanocomposites was examined to determine the sensitivity of exfoliation to processing and the potential to achieve desired morphologies through processing routes. In situ small-angle X-ray scattering studies were performed to relate the initiation and levels of exfoliated morphologies with time and temperature. Scattering data was correlated with key stages in morphology development to provide insight into the process-morphology relationship. Absolute temperature as well as heating rate was shown to directly affect the development of exfoliated nanocomposite morphology. (C) 2002 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:1033 / 1041
页数:9
相关论文
共 27 条
[11]  
LAN T, 1995, CHEM MATER, V7, P2144, DOI 10.1021/cm00059a023
[12]   CLAY-REINFORCED EPOXY NANOCOMPOSITES [J].
LAN, T ;
PINNAVAIA, TJ .
CHEMISTRY OF MATERIALS, 1994, 6 (12) :2216-2219
[13]   SYNTHESIS AND BARRIER PROPERTIES OF POLY(EPSILON-CAPROLACTONE)-LAYERED SILICATE NANOCOMPOSITES [J].
MESSERSMITH, PB ;
GIANNELIS, EP .
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 1995, 33 (07) :1047-1057
[14]   SYNTHESIS AND CHARACTERIZATION OF LAYERED SILICATE-EPOXY NANOCOMPOSITES [J].
MESSERSMITH, PB ;
GIANNELIS, EP .
CHEMISTRY OF MATERIALS, 1994, 6 (10) :1719-1725
[15]  
MOET A, 1994, MATER RES SOC SYMP P, V351, P91, DOI 10.1557/PROC-351-91
[16]  
Moore D. M, 1997, XRAY DIFFRACTION IDE
[17]  
OKADA A, 1990, MATER RES SOC SYMP P, V171, P45, DOI 10.1557/PROC-171-45
[18]  
PINNAVAIA TJ, 1994, MATER RES SOC SYMP P, V346, P81, DOI 10.1557/PROC-346-81
[19]  
ULLETT J, 1992, THESIS U DAYTON
[20]   SYNTHESIS OF NYLON 6-CLAY HYBRID [J].
USUKI, A ;
KOJIMA, Y ;
KAWASUMI, M ;
OKADA, A ;
FUKUSHIMA, Y ;
KURAUCHI, T ;
KAMIGAITO, O .
JOURNAL OF MATERIALS RESEARCH, 1993, 8 (05) :1179-1184