On size and technological effects in fatigue analysis and prediction of engineering materials and components

Analytical approaches concerning size, stress gradient and technological effects such as surface roughness and residual stresses induced during manufacturing processes are presented and discussed in this paper. Their implementation into the Short-Crack-Model for fatigue-life (lifetime to initiation of cracks of a size of 0.5-1 mm) prediction of engineering components subjected to cyclic loading is explained in detail. The procedures to consider the aforementioned effects are demonstrated by using an example of a forged and tempered steering shaft made of low-alloyed steel subjected to variable amplitude bend loading. The corresponding experimental results are used to check the accuracy of the analytical fatigue-life prediction. The comparison between analytically calculated and experimentally determined fatigue-life values emphasises the significance of technological effects (surface roughness, residual stresses) on fatigue-life estimation and the usefulness of the Short-Crack-Model for fatigue-resistant design of engineering components. (C) 2002 Elsevier Science Ltd. All rights reserved.