Acid-base polyimide blends for the application as electrolyte membranes for fuel cells

被引:91
作者
Jang, Wonbong
Sundar, Saimani
Choi, Seunghyuk
Shul, Yong-Gun
Han, Haksoo
机构
[1] Yonsei Univ, Dept Chem Engn, Seoul 120749, South Korea
[2] Yonsei Univ, Yonsei Ctr Clean Technol, Seoul 120749, South Korea
关键词
polyimides; blends; ionomers; ionic crosslinking; electrolyte membrane; fuel cell;
D O I
10.1016/j.memsci.2006.01.035
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The synthesis and characterization of new acid-base polymer blend membranes for the use in polymer electrolyte membrane fuel cell is presented in this paper. A novel polymeric base is synthesized from 1,4,5,8-naphthalenetetracarboxylic dianhydride, 2-bis [4-(4-aminophenoxy)phenyl] hexafluoropropane and diaminoacrydine hemisulfate where the diaminoacrydine hemisulfate contribute the tertiary nitrogen groups to the polyimide backbone. This base polyimide is blended with a polyimide having sulfonic acid group in the main chain. The sulfonated polyimide is synthesized from 1,4,5,8-naphthalene-tetracarboxylic dianhydride (NTDA), 4,4'-diaminobiphenyl 2,2'-disulfonic acid (BDSA), 2-bis [4-(4aminophenoxy)phenyl] hexafluoropropane (HFBAPP). Various polyimide blends having different molar ratio of sulfonic acid group and acrydine group are synthesized and they are characterized for thermal stability, ion exchange capacity, water uptake, hydrolytic stability and proton conductivity. All the sulfonated polyimides have good thermal stability and exhibited three-step degradation pattern. With the increase in polymeric base content, IEC decreased as AB-0% (2.0640)> AB-10% (2.0058)> AB-20% (1.8792)> AB-30% (1.5686)> AB-40% (1.2670)> AB-50% (1.1690 > AB-75% (0.9098) and water uptake decreased as AB-0% (34.06%)> AB-10% (32.82%)> AB-20% (24.01%)> AB-30% (20.31%)> AB40% (12.86%)> AB-50% (9.25%)> AB-75% (8.37%). Proton conductivity of the acid-base polyimide blends at 90 degrees C are AB-0% (0.197)> AB10% (0.124)> AB-20% (0.122)> AB-30% (0.088)> AB-40% (0.080)> AB-50% (0.034)> AB-75% (0.025). Polyimide blends showed higher hydrolytic stability than the pure acid polyimide. Between the polyimide blends the hydrolytic stability increased with increase in the base polymer content which is attributed to the increase in ionic crosslink density which reduces the polymer swelling and hence the mechanical stability of the membrane increases. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码:321 / 329
页数:9
相关论文
共 37 条
[31]  
Tang CM, 2004, J NEW MAT ELECTR SYS, V7, P287
[32]  
Van Zyl AJ, 1999, J APPL POLYM SCI, V74, P422, DOI 10.1002/(SICI)1097-4628(19991010)74:2<422::AID-APP25>3.0.CO
[33]  
2-X
[34]  
Walker M, 1999, J APPL POLYM SCI, V74, P67, DOI 10.1002/(SICI)1097-4628(19991003)74:1<67::AID-APP7>3.0.CO
[35]  
2-2
[36]   Synthesis, proton conductivity and methanol permeability of a novel sulfonated polyimide from 3-(2′,4′-diaminophenoxy)propane sulfonic acid [J].
Yin, Y ;
Fang, JH ;
Cui, YF ;
Tanaka, K ;
Kita, H ;
Okamoto, K .
POLYMER, 2003, 44 (16) :4509-4518
[37]   Development and characterization of sulfonated-unmodiftied and sulfonated-aminated PSU Udel® blend membranes [J].
Zhang, W ;
Tang, CM ;
Kerres, J .
SEPARATION AND PURIFICATION TECHNOLOGY, 2001, 22-3 (1-3) :209-221