Low temperature dependencies of the elastic properties of Ti4AlN3, Ti3Al1.1C1.8, and Ti3SiC2

被引:197
作者
Finkel, P [1 ]
Barsoum, MW
El-Raghy, T
机构
[1] Phys Acoust Corp, Princeton, NJ 08648 USA
[2] Drexel Univ, Philadelphia, PA 19104 USA
关键词
D O I
10.1063/1.372080
中图分类号
O59 [应用物理学];
学科分类号
摘要
In this article we report on the temperature dependencies of the longitudinal and shear sound velocities in Ti4AlN3, Ti3Al1.1C1.8, and Ti3SiC2. The velocities are measured using a phase sensitive pulse-echo ultrasonic technique in the 90-300 K temperature range. At room temperature, Young's, E-RT, and shear, mu(RT), moduli and Poisson's ratio of Ti4AlN3 are 310 +/- 2, 127 +/- 2 GPa, and 0.22, respectively. The corresponding values for Ti3AlC2 are 297.5 +/- 2, 124 +/- 2 GPa, and 0.2. Both moduli increase slowly with decreasing temperature and plateau out at temperatures below approximate to 125 K. A least squares fit of the temperature dependencies of the shear and Young's moduli of Ti4AlN3 yield: mu/mu(RT) = 1 - 1.5 x 10(-4)(T - 298), and E/E-RT = 1 - 0.74 x 10(-4)(T - 298), for T > 125 K. The corresponding relationships for Ti3Al1.1C1.8 are: mu/mu(RT) = 1 - 1.2 x 10(-4)(T - 298), and E/E-RT = 1 - 0.84 x 10(-4)(T - 298) for T > 125 K. The acoustic Debye temperatures calculated for Ti4AlN3 and Ti3AlC2, as well as Ti3SiC2, are all above 700 K, in agreement with values calculated from low temperature heat capacity measurements. (C) 2000 American Institute of Physics. [S0021-8979(00)09503-7].
引用
收藏
页码:1701 / 1703
页数:3
相关论文
共 22 条
[1]  
Barsoum MW, 1997, J MATER SYNTH PROCES, V5, P197
[2]   Fabrication and characterization of M2SnC (M = Ti, Zr, Hf and Nb) [J].
Barsoum, MW ;
Yaroschuk, G ;
Tyagi, S .
SCRIPTA MATERIALIA, 1997, 37 (10) :1583-1591
[3]   Layered machinable ceramics for high temperature applications [J].
Barsoum, MW ;
Brodkin, D ;
ElRaghy, T .
SCRIPTA MATERIALIA, 1997, 36 (05) :535-541
[4]   High-resolution transmission electron microscopy of Ti4AlN3, or Ti3Al2N2 revisited [J].
Barsoum, MW ;
Farber, L ;
Levin, I ;
Procopio, A ;
El-Raghy, T ;
Berner, A .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1999, 82 (09) :2545-2547
[5]   Room-temperature ductile carbides [J].
Barsoum, MW ;
El-Raghy, T .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (02) :363-369
[6]   Thermal properties of Ti3SiC2 [J].
Barsoum, MW ;
El-Raghy, T ;
Rawn, CJ ;
Porter, WD ;
Wang, H ;
Payzant, EA ;
Hubbard, CR .
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS, 1999, 60 (04) :429-439
[7]   Synthesis and characterization of a remarkable ceramic: Ti3SiC2 [J].
Barsoum, MW ;
ElRaghy, T .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1996, 79 (07) :1953-1956
[8]  
BLACKMAN M, 1955, HDB PHYSIK
[9]   Processing and mechanical properties of Ti3SiC2:: I, reaction path and microstructure evolution [J].
El-Raghy, T ;
Barsoum, MW .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1999, 82 (10) :2849-2854
[10]   Processing and mechanical properties of Ti3SiC2:: II, effect of grain size and deformation temperature [J].
El-Raghy, T ;
Barsoum, MW ;
Zavaliangos, A ;
Kalidindi, SR .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1999, 82 (10) :2855-2860