3D images of paper obtained by phase-contrast X-ray micro tomography:: image quality and binarisation

A series of paper samples was investigated using high-resolution phase-contrast microtomography at the beamline 1D 22 of the European Synchrotron Radiation Facility (ESRF) in Grenoble, France. It was shown that X-ray microtomography is a non-destructive method suitable for high resolution depicting real 3D-paper structures. The method detects highly localised changes in the refractive index of the sample, such as fibre-pore interfaces. The resulting tomograms represented an outlined image of the fibre structure with an image resolution of 1 mum. Analyses were performed in dry state, but in addition some were done in wet state The raw data obtained were transformed into 3D images. The reconstructed slices were in general of rather good quality, even if both noise and ring-like artifacts were observed. These required special filtering efforts before a segmented binary volume could be obtained for further use of the data. This approach was made up of semi-automatic routines to convert the structure into a binary format. The resulting binary volumes can be used for further characterisation of the 3D-paper structure. (C) 2002 Elsevier Science B.V. All rights reserved.