Three-Dimensional Biodegradable Structures Fabricated by Two-Photon Polymerization

被引:128
作者
Claeyssens, Frederik [1 ]
Hasan, Erol A. [2 ]
Gaidukeviciute, Arune [3 ]
Achilleos, Demetra S. [3 ,4 ]
Ranella, Anthi [3 ]
Reinhardt, Carsten [3 ,6 ]
Ovsianikov, Aleksandr [6 ]
Xiao Shizhou [6 ]
Fotakis, Costas [3 ,5 ]
Vamvakaki, Maria [3 ,4 ]
Chichkov, Boris N. [3 ,6 ]
Farsari, Maria [3 ]
机构
[1] Univ Sheffield, Kroto Res Inst, Dept Mat Engn, Biomat & Tissue Engn Grp, Sheffield S3 7HQ, S Yorkshire, England
[2] Univ Cambridge, Dept Chem, Cambridge CB2 1EW, England
[3] FORTH, IESL, Iraklion, Crete, Greece
[4] Univ Crete, Dept Mat Sci & Technol, Iraklion, Greece
[5] Univ Crete, Dept Phys, Iraklion, Greece
[6] Laser Zentrum Hannover eV, Hannover, Germany
基金
英国工程与自然科学研究理事会;
关键词
IN-VIVO DEGRADATION; SCAFFOLDS; COPOLYMERS; VITRO; BIOMATERIALS; BIOCOMPOSITE;
D O I
10.1021/la803803m
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
Two-photon polymerization has been employed to fabricate three-dimensional structures using the biodegradable triblock copolymer poly(epsilon-caprolactone-co-trimethylenecarbonate)-b-poly(ethylene glycol)-b-poly(epsilon-caprolactone-co-trimethylenecarbonate) with 4,4'-bis(diethylamino)benzophenone as the photoinitiator. The fabricated structures were of good quality and had four micron resolution. Initial cytotoxicity tests show that the material does not affect cell proliferation. These studies demonstrate the potential of two-photon polymerization as a technology for the fabrication of biodegradable scaffolds for tissue engineering.
引用
收藏
页码:3219 / 3223
页数:5
相关论文
共 35 条
[1]   Cell culture: Biology's new dimension [J].
Abbott, A .
NATURE, 2003, 424 (6951) :870-872
[2]   Investigation of the two-photon polymerisation of a Zr-based inorganic-organic hybrid material system [J].
Bhuian, B. ;
Winfield, R. J. ;
O'Brien, S. ;
Crean, G. M. .
APPLIED SURFACE SCIENCE, 2006, 252 (13) :4845-4849
[3]   Development of tissue scaffolds using selective laser sintering of polyvinyl alcohol/hydroxyapatite biocomposite for craniofacial and joint defects [J].
Chua, CK ;
Leong, KF ;
Tan, KH ;
Wiria, FE ;
Cheah, CM .
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2004, 15 (10) :1113-1121
[4]   Use of stereolithography to manufacture critical-sized 3D biodegradable scaffolds for bone ingrowth [J].
Cooke, MN ;
Fisher, JP ;
Dean, D ;
Rimnac, C ;
Mikos, AG .
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2003, 64B (02) :65-69
[5]   Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication [J].
Cumpston, BH ;
Ananthavel, SP ;
Barlow, S ;
Dyer, DL ;
Ehrlich, JE ;
Erskine, LL ;
Heikal, AA ;
Kuebler, SM ;
Lee, IYS ;
McCord-Maughon, D ;
Qin, JQ ;
Röckel, H ;
Rumi, M ;
Wu, XL ;
Marder, SR ;
Perry, JW .
NATURE, 1999, 398 (6722) :51-54
[6]  
Dhariwala B, 2004, TISSUE ENG, V10, P1316, DOI 10.1089/1076327042500256
[7]   Two photon induced polymerization of organic-inorganic hybrid biomaterials for microstructured medical devices [J].
Doraiswamy, A ;
Jin, C ;
Narayan, RJ ;
Mageswaran, P ;
Mente, P ;
Modi, R ;
Auyeung, R ;
Chrisey, DB ;
Ovsianikov, A ;
Chichkov, B .
ACTA BIOMATERIALIA, 2006, 2 (03) :267-275
[8]   Fabrication of three-dimensional structures by three-photon polymerization [J].
Farsari, M ;
Filippidis, G ;
Fotakis, C .
OPTICS LETTERS, 2005, 30 (23) :3180-3182
[9]   Soft and hard tissue response to photocrosslinked poly(propylene fumarate) scaffolds in a rabbit model [J].
Fisher, JP ;
Vehof, JWM ;
Dean, D ;
van der Waerden, JPCM ;
Holland, TA ;
Mikos, AG ;
Jansen, JA .
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 2002, 59 (03) :547-556
[10]   Adhesive properties of laminated alginate gels for tissue engineering of layered structures [J].
Gleghorn, Jason P. ;
Lee, Christopher S. D. ;
Cabodi, Mario ;
Stroock, Abraham D. ;
Bonassar, Lawrence J. .
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A, 2008, 85A (03) :611-618