共 31 条
Chemical vapor deposited RuOx films -: Effect of oxygen flow rate
被引:13
作者:
Ganesan, PG
[1
]
Eizenberg, M
Dornfest, C
机构:
[1] Technion Israel Inst Technol, Dept Mat Engn, IL-32000 Haifa, Israel
[2] Appl Mat Inc, Santa Clara, CA 95054 USA
关键词:
D O I:
10.1149/1.1495910
中图分类号:
O646 [电化学、电解、磁化学];
学科分类号:
081704 ;
摘要:
Ruthenium and ruthenium oxide films were deposited on a Ru/SiO2/Si substrate at 355degreesC using a Ru(C2H5C5H4)(2)-[Ru(EtCp)(2)] precursor and oxygen gas. The effects of the oxygen flow rate on film composition, microstructure, surface morphology, stress, and resistivity were investigated. The oxygen content in the film increases as the oxygen flow rate increases and saturates at a flow of 1200 sccm. Films deposited with an O-2 flow rate of 800 sccm or less have the structure of the ruthenium phase, a [001] texture, and smooth surface morphology. Films deposited with an O-2 flow rate of 1200 sccm or above have the structure of the ruthenium dioxide phase and higher surface roughness. Ru-phase films have a high stress level and low resistivity; the increase of oxygen flow rate from 50 to 800 sccm results in a decrease of stress from 8 to 5 G dyn/cm(2) and an increase of resistivity from 19 to 48 muOmega cm. RuO2-phase films have a relatively low stress level (2 G dyn/cm(2)), which does not change significantly with the oxygen flow rate, and high resistivity which slightly decreases from 120 to 115 muOmega cm as the oxygen flow rate increases from 1200 to 2000 sccm. (C) 2002 The Electrochemical Society.
引用
收藏
页码:G510 / G516
页数:7
相关论文