Fundamental parameters line profile fitting in laboratory diffractometers

被引:566
作者
Cheary, RW
Coelho, AA
Cline, JP
机构
[1] Univ Technol Sydney, Sydney, NSW 2007, Australia
[2] Bruker AXS, D-76187 Karlsruhe, Germany
[3] Natl Inst Stand & Technol, Gaithersburg, MD 20899 USA
关键词
fundamental parameters; microstructure analysis; parafocusing optics; profile convolution; profile fitting; x-ray powder diffraction;
D O I
10.6028/jres.109.002
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
The fundamental parameters approach to line profile fitting uses physically based models to generate the line profile shapes. Fundamental parameters profile fitting (FPPF) has been used to synthesize and fit data from both parallel beam and divergent beam diffractometers. The refined parameters are determined by the diffractometer configuration. In a divergent beam diffractometer these include the angular aperture of the divergence slit, the width and axial length of the receiving slit, the angular apertures of the axial Soller slits, the length and projected width of the x-ray source, the absorption coefficient and axial length of the sample. In a parallel beam system the principal parameters are the angular aperture of the equatorial analyser/Soller slits and the angular apertures of the axial Soller slits. The presence of a monochromator in the beam path is normally accommodated by modifying the wavelength spectrum and/or by changing one or more of the axial divergence parameters. Flat analyzer crystals have been incorporated into FPPF as a Lorentzian shaped angular acceptance function. One of the intrinsic benefits of the fundamental parameters approach is its adaptability any laboratory diffractometer. Good fits can normally be obtained over the whole 20 range without refinement using the known properties of the diffractometer, such as the slit sizes and diffractometer radius, and emission profile.
引用
收藏
页码:1 / 25
页数:25
相关论文
共 43 条
[2]   STUDY OF THE K-ALPHA EMISSION-SPECTRUM OF COPPER [J].
BERGER, H .
X-RAY SPECTROMETRY, 1986, 15 (04) :241-243
[3]   Advanced fundamental parameters model for improved profile analysis [J].
Bergmann, J ;
Kleeberg, R ;
Haase, A ;
Breidenstein, B .
ECRS 5: PROCEEDINGS OF THE FIFTH EUROPEAN CONFERENCE ON RESIDUAL STRESSES, 2000, 347-3 :303-308
[4]  
BERGMANN J, SOFTWARE BGMN
[5]   DESIGN AND PROPERTIES OF POSITION-SENSITIVE PROPORTIONAL-COUNTERS USING RESISTANCE-CAPACITANCE POSITION ENCODING [J].
BORKOWSKI, CJ ;
KOPP, MK .
REVIEW OF SCIENTIFIC INSTRUMENTS, 1975, 46 (08) :951-962
[6]   RECENT IMPROVEMENTS TO RC-LINE ENCODED POSITION-SENSITIVE PROPORTIONAL-COUNTERS [J].
BORKOWSKI, CJ ;
KOPP, MK .
JOURNAL OF APPLIED CRYSTALLOGRAPHY, 1978, 11 (OCT) :430-434
[7]  
Bowen K., 1998, HIGH RESOLUTION XRAY
[8]   ATOMIC-LEVEL WIDTHS FOR X-RAY SPECTROMETRY [J].
CAMPBELL, JL ;
PAPP, T .
X-RAY SPECTROMETRY, 1995, 24 (06) :307-319
[9]  
Cheary R.W., 1996, SOFTWARE XFIT KOALAR
[10]   Axial divergence in a conventional X-ray powder diffractometer. I. Theoretical foundations [J].
Cheary, RW ;
Coelho, AA .
JOURNAL OF APPLIED CRYSTALLOGRAPHY, 1998, 31 (pt 6) :851-861