Effects of different flying altitudes on biophysical stand properties estimated from canopy height and density measured with a small-footprint airborne scanning laser

被引:129
作者
Næsset, E [1 ]
机构
[1] Agr Univ Norway, Dept Ecol & Nat Resource Management, N-1432 As, Norway
关键词
forest inventory; laser scanning; canopy height; canopy density; Monte Carlo simulation;
D O I
10.1016/j.rse.2004.03.009
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Canopy height distributions were created from small-footprint airborne laser scanner data collected over 133 georeferenced field sample plots and 56 forest stands located in young and mature forest. The plot size was 300-400 m(2) and the average stand size was 1.7 ha. Spruce and pine were the dominant tree species. Canopy height distributions were created from both first and last pulse data. The laser data were acquired from two different flying attitudes, i.e., 530-540 and 840-850 m above ground. Height percentiles, mean and maximum height values, coefficients of variation of the heights, and canopy density at different height intervals above the ground were computed from the laser-derived canopy height distributions. Corresponding metrics derived from the two different flying altitudes were compared. Only I of 54 metrics derived from the first pulse data differed significantly between flying altitudes. For the last pulse data, the mean values of the height percentiles were up to 50 cm higher than the corresponding values of the low-altitude data. The high-altitude data yielded significantly higher values for most of the canopy density measures. The standard deviation for the differences between high and low flying altitude for each of the metrics was estimated. The standard deviations for the height percentiles ranged from 0.07 to 0.30 cm in the forest stands, indicating a large degree of stability between repeated flight overpasses. The effect of variable flying altitude on mean tree height (h(L)), stand basal area (G), and stand volume (P) estimated from the laser-derived height and density measures using a two-stage inventory procedure was assessed by randomly combining laser data from the two flying altitudes for each individual sample plot and forest stand. The sample plots were used as training data to calibrate the models. The random assignment was repeated 10,000 times. The results of the 10,000 trials indicated that the precision of the estimated values of h(L), G, and V was robust against alterations in flying altitude. (C) 2004 Elsevier Inc. All rights reserved.
引用
收藏
页码:243 / 255
页数:13
相关论文
共 35 条
[11]  
Holmgren J, 2003, FOREST SCI, V49, P419
[12]  
Husch B., 1993, Forest Mensuration, V3rd ed.
[13]   Determination of terrain models in wooded areas with airborne laser scanner data [J].
Kraus, K ;
Pfeifer, N .
ISPRS JOURNAL OF PHOTOGRAMMETRY AND REMOTE SENSING, 1998, 53 (04) :193-203
[14]   Surface lidar remote sensing of basal area and biomass in deciduous forests of eastern Maryland, USA [J].
Lefsky, MA ;
Harding, D ;
Cohen, WB ;
Parker, G ;
Shugart, HH .
REMOTE SENSING OF ENVIRONMENT, 1999, 67 (01) :83-98
[15]   Lidar remote sensing of biophysical properties of tolerant northern hardwood forests [J].
Lim, K ;
Treitz, P ;
Baldwin, K ;
Morrison, I ;
Green, J .
CANADIAN JOURNAL OF REMOTE SENSING, 2003, 29 (05) :658-678
[16]   Derivations of stand heights from airborne laser scanner data with canopy-based quantile estimators [J].
Magnussen, S ;
Boudewyn, P .
CANADIAN JOURNAL OF FOREST RESEARCH, 1998, 28 (07) :1016-1031
[17]  
Magnussen S, 1999, FOREST SCI, V45, P407
[18]   Use of large-footprint scanning airborne lidar to estimate forest stand characteristics in the Western Cascades of Oregon [J].
Means, JE ;
Acker, SA ;
Harding, DJ ;
Blair, JB ;
Lefsky, MA ;
Cohen, WB ;
Harmon, ME ;
McKee, WA .
REMOTE SENSING OF ENVIRONMENT, 1999, 67 (03) :298-308
[19]  
Means JE, 2000, PHOTOGRAMM ENG REM S, V66, P1367
[20]  
MILLER RJ, 1981, SIMULTANEOUS STAT IN