Design and manufacturing of automobile hood using natural composite structure

被引：62

作者：

Kong, Changduk ^{[1
]}

Lee, Haseung ^{[1
]}

Park, Hyunbum ^{[2
]}

机构：

[1] Chosun Univ, Dept Aerosp Engn, 375 Seosukdong, Gwangju 502759, South Korea

[2] Howon Univ, Dept Def & Sci Technol Aeronaut, 64 Howondae 3gil, Impi 573718, Gunsan, South Korea

来源：

COMPOSITES PART B-ENGINEERING | 2016年 / 91卷

基金：

新加坡国家研究基金会;

关键词：

Mechanical properties; Strength; Finite element analysis (FEA); IMPACT; HEAD;

D O I：

10.1016/j.compositesb.2015.12.033

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Recently, there has been a growing interest in the use of naturally sourced fibers for use in composites design and manufacture. In this work, a structural design on automobile hood using natural flax fiber composite was performed. The structural design results of flax/vinyl ester composite hood were compared with the design results of metal hood structure. Through the structural analyses using commercial FEM software, it is confirmed that the designed automobile hood using natural composite is reasonable for structural safety, stability and weight. Through the structural test, it is confirmed that the designed hood structure is acceptable for structural safety and stability. (C) 2016 Elsevier Ltd. All rights reserved.

引用

页码：18 / 26

页数：9

共 12 条

[1]

Ford, 2012, REINF PLAST, V56, P4, DOI [10.1016/S0034-3617(12)70115-7, DOI 10.1016/S0034-3617(12)70115-7]

[2]

General Motors, 2003, REINF PLAST, V47, P4

[3]

Jorg Mussig, 2012, JEC COMPOS, P40

[4]

Jung HS, 2002, KOREA CAD CAM J, V7, P233

[5] Study on structural design and analysis of flax natural fiber composite tank manufactured by vacuum assisted resin transfer molding [J].

Kong, Changduk ;

Park, Hyunbum ;

Lee, Joungwhan .

MATERIALS LETTERS, 2014, 130 :21-25

[6] Green composites: A review of adequate materials for automotive applications [J].

Koronis, Georgios ;

Silva, Arlindo ;

Fontul, Mihail .

COMPOSITES PART B-ENGINEERING, 2013, 44 (01) :120-127

[7] Optimal design of composite hood with reinforcing ribs through stiffness analysis [J].

Kwak, DY ;

Jeong, JH ;

Cheon, JS ;

Im, YT .

COMPOSITE STRUCTURES, 1997, 38 (1-4) :351-359

[8] Comparison of steel, aluminum and composite bonnet in terms of pedestrian head impact [J].

Masoumi, A. ;

Shojaeefard, Mohammad Hassan ;

Najibi, Amir .

SAFETY SCIENCE, 2011, 49 (10) :1371-1380

[9] Characterization of the thermo-mechanical behaviour of Hemp fibres intended for the manufacturing of high performance composites [J].

Placet, Vincent .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2009, 40 (08) :1111-1118

[10] Pedestrian safety investigation of the new inner structure of the hood to mitigate the impact injury of the head [J].

Shojaeefard, Mohammad Hassan ;

Najibi, Amir ;

Ahmadabadi, Meisam Rahmati .

THIN-WALLED STRUCTURES, 2014, 77 :77-85

← 1 2 →