Hydrogenation of naphthalene on noble-metal-containing mesoporous MCM-41 aluminosilicates

Aromatic saturation of oil fractions is a key process in the refining industry due to increasing demand for cleanest distillates with superior performances. In this study, the behavior of different catalysts containing I wt.% of noble-metal inside a mesoporous MCM-41 (Si:Al = 20) framework was investigated in the hydrogenation of naphthalene, as preliminary step to investigate bimetallic catalysts. While at atmospheric pressure only Rh and Pd showed a low hydrogenation activity, in the tests performed at 6.0 MPa the catalytic activity grew, exhibiting the following order: Pt > Rh much greater than Pd much greater than> Ru approximate to In However, all the catalysts required a large H-2 excess, to avoid a decrease in hydrogenation and ring-opening activity, and gave rise to the best performance for a contact time of 6.8 s, favouring at lower values the partial hydrogenation to tetralin and at higher values cracking reactions. Finally, all the catalysts showed low thio-tolerance, with significant deactivation already feeding 100 ppm wt. of dibenzothiophene (DBT), with a partial reversibility only for the Pt-containing catalyst (CAT 3). (C) 2003 Elsevier Science B.V. All rights reserved.