Electrodeposition and characterisation of CdTe films for solar cell applications

被引:42
作者
Duffy, NW
Peter, LM [1 ]
Wang, RL
Lane, DW
Rogers, KD
机构
[1] Univ Bath, Dept Chem, Bath BA2 7AY, Avon, England
[2] Cranfield Univ, Dept Mat & Med Sci, Swindon SN6 8LA, Wilts, England
基金
英国工程与自然科学研究理事会;
关键词
cadmium telluride; solar cells; electrodeposition; flow cell; sulfur diffusion; photocurrent; electroabsorbance; electroreflectance;
D O I
10.1016/S0013-4686(00)00409-6
中图分类号
O646 [电化学、电解、磁化学];
学科分类号
081704 ;
摘要
Thin film CdS/CdTe solar cells have been prepared by electrodeposition of CdTe on CdS coated conducting glass from an acidic electrolyte containing a high concentration of Cd2+ and a low concentration of TeO2. Deposition of a 2 mu m CdTe film from stirred solutions typically requires 3 h. High quality CdTe films have been grown much more rapidly using a channel flow cell: 2 mu m films were deposited in around 24 min. The CdTe\CdS thin film structures obtained in this way were characterised by photocurrent spectroscopy, electrolyte electroreflectance/absorbance spectroscopy (EER/A), XRD and AFM. CdS\CdTe films prepared by both methods were annealed at 415 degrees C to effect type conversion of the CdTe layer. As deposited CdTe is generally n-type and exhibits strong preferential [111] orientation. Type conversion is not necessarily accompanied by recrystallisation: most of the CdTe films deposited from stirred solution did not recrystallise. Recrystallisation did occur for films grown by pulsing the potential periodically from 50 mV to >350 mV versus Cd2+/Cd during deposition. Evidence for sulphur and tellurium diffusion leading to alloy formation during annealing was obtained from bandgap shifts detected by photocurrent spectroscopy and EER/A and from changes in lattice parameters measured by XRD. The composition of the annealed electrodeposited structures approached CdS0.95Te0.05\CdTe0.95S0.05 after 15 min. Test solar cells with AM 1.5 efficiencies approaching 6% were fabricated. Recrystallised samples gave higher solar cell efficiencies than non-recrystallised samples. (C) 2000 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:3355 / 3365
页数:11
相关论文
共 36 条
[21]  
MORRIS GC, 1991, J CRYST GROWTH, V117, P929
[22]  
OHATA K, 1973, JPN J APPL PHYS, V12, P1641, DOI [10.1143/JJAP.12.1641, 10.1143/JJAP.12.1198]
[23]  
OZSAN ME, 1996, J MAT SCI MAT ELECT, V7, P110
[24]   CATHODIC DEPOSITION OF CDTE FROM AQUEOUS-ELECTROLYTES [J].
PANICKER, MPR ;
KNASTER, M ;
KROGER, FA .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1978, 125 (04) :566-572
[25]  
PETER L, UNPUB
[26]   Channel flow cell electrodeposition of CdTe for solar cells [J].
Peter, LM ;
Wang, RL .
ELECTROCHEMISTRY COMMUNICATIONS, 1999, 1 (11) :554-558
[27]  
PETER LM, 1989, COMPREHENSIVE CHEM K, V29, P353
[28]  
RACCAH PM, 1985, J VAC SCI TECHNOL, V13, P13
[29]   The crystal structure of CdS-CdTe thin film heterojunction solar cells [J].
Rogers, KD ;
Painter, JD ;
Healy, MJ ;
Lane, DW ;
Ozsan, ME .
THIN SOLID FILMS, 1999, 339 (1-2) :299-304
[30]   The structural changes in CdS-CdTe thin films due to annealing [J].
Rogers, KD ;
Painter, JD ;
Lane, DW ;
Healy, M .
JOURNAL OF ELECTRONIC MATERIALS, 1999, 28 (02) :112-117