Determination of cadmium by FAAS after on-line enrichment using a mini column packed with Amberlite XAD-2 loaded with TAM

A procedure for determination of trace amounts of cadmium with on-line preconcentration has been proposed. It is based on chemical sorption of cadmium(II) ions onto a minicolumn packed with Amberlite XAD-2 resin loaded with TAM reagent. After being preconcentrated, cadmium was eluted by 0.50 mol l(-1) hydrochloric acid solution and straight determined on-line by flame atomic absorption spectrometry. A time-based technique was used. Chemical and flow variables as well as concomitant ions were studied in the developed procedure. Detection limit (3 sigma, n = 22) was 1.2 mu g l(-1) for the analytical curve within the range of 0-200.0 mu g l(-1). An enrichment factor of 108 and a retention efficiency of 75.6% were achieved for a sample volume of 5.2 mi (1 min preconcentration time). The precision of the continuous Preconcentration method, calculated as the relative standard deviation in sample solutions containing 10 mu g l(-1) of cadmium was 4 and 9%, regarding repeatability and reproducibility, respectively. The selectivity of the proposed procedure was also evaluated. Results showed that iron(III), zinc(II), nickel(II), manganese(II), aluminum(III), copper(II), lead(II), cobalt(II), chromium(VI) (200 mu g l(-1) concentration) did not interfere during cadmium determination (10.0 mu g l(-1) concentration). Achieved analytical results for rice flour (NIES 10c) and lobster hepatopancreas (TORT-1) standard reference materials were in good agreement with the certified values. A high sample throughput (40 samples h(-1)), preconcentration factor and simplicity are the main advantages in this analytical procedure. (C) 2000 Elsevier Science B.V. All rights reserved.