The manufacture of glass/epoxy composites with multilayer woven architectures

被引：23

作者：

Bannister, M

Herszberg, I

Nicolaidis, A

Coman, F

Leong, KH

机构：

[1] Aerosp Struct Ltd, Cooperat Res Ctr, Fishermens Bend, Vic 3207, Australia

[2] Royal Melbourne Inst Technol, Dept Aerosp Engn, Sir Lawrence Wackett Ctr Aerosp Design & Technol, Melbourne, Vic 3001, Australia

[3] Royal Melbourne Inst Technol, Dept Mfg Engn Syst, Melbourne, Vic 3083, Australia

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 1998年 / 29卷 / 03期

关键词：

microstructure; weaving; textile composites;

D O I：

10.1016/S1359-835X(97)00078-X

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Multilayer, integrally woven preforms have been constructed from E-glass yam in three different weave architectures with the in-plane fibres exhibiting minimum crimping. Microscopic examination of the architectures after resin transfer moulding revealed that the binder yam arrangement and compaction pressure have a strong influence on the distribution of fibres and resin-rich areas. However, preliminary mechanical testing indictated that, for the preforms investigated, the final weave architecture does not have a significant influence on the tensile mechanical performance of the composite structure. A procedure is described for producing a geometric model of the architecture of such multilayer woven preforms which may then be used for their visualisation and to quantify geometric characteristics for use in further analysis. (C) 1998 Published by Elsevier Science Limited. All rights reserved.

引用

页码：293 / 300

页数：8