Dry cutting

被引：533

作者：

Klocke, F ^{[1
]}

Eisenblatter, G ^{[1
]}

机构：

[1] Rhein Westfal TH Aachen, D-5100 Aachen, Germany

来源：

CIRP ANNALS 1997 - MANUFACTURING TECHNOLOGY, VOLUME 46/2/1997: ANNALS OF THE INTERNATIONAL INSTITUTION FOR PRODUCTION ENGINEERING RESEARCH | 1997年

关键词：

machining; dry cutting; environmental impact;

D O I：

10.1016/S0007-8506(07)60877-4

中图分类号：

TP [自动化技术、计算机技术];

学科分类号：

0812 ;

摘要：

The vast majority of machining operations exploit the good cooling and lubricating characteristics of cooling lubricants (CL). But, as costs for waste disposal increase, companies are now being forced to implement strategies in order to reduce the amount of CL used in their production lines. The most logical measure which can be taken to eliminate all of the problems associated with the use of CL is dry machining. In most cases, however, a machining operation without lubricant finds acceptance only when it is possible to guarantee that the part quality and machining times achieved in wet machining are equalled or surpassed. The introduction of dry machining techniques may also include the use of minimal quantities of lubricant (MQL). The following paper deals with the most recent developments in dry cutting.

引用

页码：519 / 526

页数：8

共 53 条

[21]

Konig W., Osterhaus G., Gerschwiler K., : Kühlschmierstoff-Eine ökologische Herausforderung an die Fertigungstechnik, (1993)

[22]

Kress D., (1974)

[23]

Kummel D., (1990)

[24]

Kurimoto T., Barrow G., The Influence of Aqueous Fluids on the Wear Characteristics and Life of Carbide Cutting Tools, Annals of CIRP, Vol. 31, 1, (1982)

[25]

Lahres M., Linden P., Liu X., Muller-Hummel P., Walter J., “Trockenbearbeitung von Aluminium-Knetlegie-rungen”,, pp. 115-130, (1996)

[26]

Lahres M., Muller-Hummel P., Doerfel O., (1996)

[27]

Lauscher J., (1992)

[28]

Lembke D, pp. 12-13, (1995)

[29]

Lenz E., Katz Z., Ber A., Investigation on the Flank Wear of Cemented Carbide Tools, ASME Transaction Journal of Engineering for Industry, Vol. 98, No. 1, pp. 246-250, (1976)

[30]

Lung D., Gerschwiler K., Eisenblatter G., (1995)

← 1 2 3 4 5 6 →