Effect of nanoplatelet aspect ratio on mechanical properties of epoxy nanocomposites

被引:111
作者
Boo, W-J
Sun, L.
Warren, G. L.
Moghbelli, E.
Pham, H.
Clearfield, A.
Sue, H. -J. [1 ]
机构
[1] Texas A&M Univ, Dept Mech Engn, Polymer Technol Ctr, College Stn, TX 77843 USA
[2] Texas A&M Univ, Dept Chem, College Stn, TX 77843 USA
[3] Dow Chem Co USA, Resins R&D, Freeport, TX 77541 USA
基金
美国国家科学基金会;
关键词
polymer nanocomposite; alpha-zirconium phosphate; aspect ratio;
D O I
10.1016/j.polymer.2006.12.042
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
To study the effect of the aspect ratio of nanoplatelets on the mechanical properties of polymer nanocomposites, epoxy/alpha-zirconium phosphate nanocomposites with two distinctive aspect ratios at ca. 100 and 1000 have been prepared and characterized. Scanning electron microscopy and transmission electron microscopy were utilized to confirm the two different sizes and aspect ratios of nanoplatelets in epoxy. As expected. it is found that mechanical properties of the nanocomposite are affected by the aspect ratio of nanoplatelets in epoxy. That is, a higher aspect ratio renders a better improvement in modulus. It is also found that the interfacial characteristics between the nanoplatelets and polymer matrix are most critical in affecting the strength and ductility of the polymer. The operative fracture mechanisms depend strongly on the aspect ratio of the nanoplatelets incorporated. The crack deflection mechanism, which leads to a tortuous path crack growth, is only observed for the high aspect ratio System. The implication of the present findings for structural applications of polymer nanocomposites is discussed. (c) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码:1075 / 1082
页数:8
相关论文
共 52 条
[21]  
KELLAR JJ, 2003, FUNCTIONAL FILLERS N
[22]   Characterization of zirconium phosphate polycation thin films grown by sequential adsorption reactions [J].
Kim, HN ;
Keller, SW ;
Mallouk, TE ;
Schmitt, J ;
Decher, G .
CHEMISTRY OF MATERIALS, 1997, 9 (06) :1414-1421
[23]   Moisture barrier characteristics of organoclay-epoxy nanocomposites [J].
Kim, JK ;
Hu, CG ;
Woo, RSC ;
Sham, ML .
COMPOSITES SCIENCE AND TECHNOLOGY, 2005, 65 (05) :805-813
[24]   Mechanical and fracture properties of epoxy/inorganic micro- and nano-composites [J].
Kinloch, AJ ;
Taylor, AC .
JOURNAL OF MATERIALS SCIENCE LETTERS, 2003, 22 (20) :1439-1441
[25]   MECHANICAL-PROPERTIES OF NYLON 6-CLAY HYBRID [J].
KOJIMA, Y ;
USUKI, A ;
KAWASUMI, M ;
OKADA, A ;
FUKUSHIMA, Y ;
KURAUCHI, T ;
KAMIGAITO, O .
JOURNAL OF MATERIALS RESEARCH, 1993, 8 (05) :1185-1189
[26]   SYNTHESIS OF NYLON-6-CLAY HYBRID BY MONTMORILLONITE INTERCALATED WITH EPSILON-CAPROLACTAM [J].
KOJIMA, Y ;
USUKI, A ;
KAWASUMI, M ;
OKADA, A ;
KURAUCHI, T ;
KAMIGAITO, O .
JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 1993, 31 (04) :983-986
[27]   ON THE NATURE OF POLYIMIDE CLAY HYBRID COMPOSITES [J].
LAN, T ;
KAVIRATNA, PD ;
PINNAVAIA, TJ .
CHEMISTRY OF MATERIALS, 1994, 6 (05) :573-575
[28]   CLAY-REINFORCED EPOXY NANOCOMPOSITES [J].
LAN, T ;
PINNAVAIA, TJ .
CHEMISTRY OF MATERIALS, 1994, 6 (12) :2216-2219
[29]  
Liu J, 2006, MATER MANUF PROCESS, V21, P143, DOI [10.1080/AMP-200068646, 10.1081/AMP-200068646]
[30]   Morphology and fracture behavior of intercalated epoxy/clay nanocomposites [J].
Liu, TX ;
Tjiu, WC ;
Tong, YJ ;
He, CB ;
Goh, SS ;
Chung, TS .
JOURNAL OF APPLIED POLYMER SCIENCE, 2004, 94 (03) :1236-1244