Electroplasticity in metals and ceramics

被引:438
作者
Conrad, H [1 ]
机构
[1] N Carolina State Univ, Dept Mat Sci & Engn, Raleigh, NC 27695 USA
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2000年 / 287卷 / 02期
关键词
electric field; electric current; electroplasticity; electron wind; superplasticity; activation energy; diffusion; electric charge; cross slip; grain boundaries;
D O I
10.1016/S0921-5093(00)00786-3
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The influence of an electric field or corresponding current on the plastic deformation of metals and ceramics is reviewed. Regarding metals, the following are considered: (al the effects of high density electric current pulse on the now stress at low to intermediate homologous temperatures; and (b) the effects of an external electric field on superplasticity at high temperatures. The major effect of the current pulses was to reduce the thermal component of the flow stress. This resulted from the combined action of an electron wind force, a decrease in the activation enthalpy for plastic deformation and an increase in the pre-exponential, the last making the largest contribution. Besides giving a reduction in the flow stress during superplastic deformation, an external electric field reduced cavitation and grain growth. The influence of the external field appears to be on the migration of vacancies or solute atom-vacancy complexes along grain boundaries to the charged surface. In the case of ceramics, the effects of an internal electric field on the plastic deformation of polycrystalline NaCl at 0.28-0.75T(M) and on the superplasticity of fine-grained oxides (MgO, Al2O3 and ZrO2) at T > 0.5T(M) are considered. Regarding NaCl, at T less than or equal to 0.5T(M) an electric field E greater than or equal to 10 kV cm(-1) is needed to enhance dislocation mobility in single crystals. However, a field of only 1 kV cm(-1) significantly reduced the flow stress in polycrystals, which is concluded to result from an enhancement of cross slip. At T > 0.5T(M), there occurred a decrease in the flow stress of polycrystalline NaCl along with a reduction in the rate-controlling diffusion activation energy. Regarding the hue-grained oxides at T > 0.5T(M), an internal electric field E less than or equal to 0.3 kV cm(-1) gave an appreciable, reversible, reduction in the flow stress by an enhancement of the rate-controlling diffusion process. Limited work suggests that a field may also retard grain growth and cavitation in ceramics. (C) 2000 Elsevier Science S.A. All rights reserved.
引用
收藏
页码:276 / 287
页数:12
相关论文
共 52 条
[1]  
ALSHITS VI, 1986, DISLOCATIONS SOLIDS, P44
[2]   Influence of an electric field on the plastic deformation of fine-grained Al2O3 [J].
Campbell, J ;
Fahmy, Y ;
Conrad, H .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (11) :2817-2823
[3]   Plastic deformation kinetics of fine-grained alumina [J].
Campbell, J ;
Fahmy, Y ;
Conrad, H .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1999, 30 (11) :2809-2816
[4]  
CAO AFW, 1991, HIGH TEMPERATURE NIO, P27
[5]   Whisker formation and the mechanism of superplastic deformation [J].
Cao, WD ;
Lu, XP ;
Conrad, H .
ACTA MATERIALIA, 1996, 44 (02) :697-706
[6]  
Cao WD, 1995, MICROMECHANICS OF ADVANCED MATERIALS, P225
[7]   SUPERPLASTIC DEFORMATION-BEHAVIOR OF 7475-ALUMINUM ALLOY IN AN ELECTRIC-FIELD [J].
CAO, WD ;
LU, XP ;
SPRECHER, AF ;
CONRAD, H .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1990, 129 (02) :157-166
[8]  
CAO WD, 1990, SUPERPLASTICITY AERO, V2, P269
[9]   EFFECT OF AN ELECTRIC-FIELD ON THE SUPERPLASTICITY OF 7475-AL [J].
CONRAD, H ;
CAO, WD ;
LU, XP ;
SPRECHER, AF .
SCRIPTA METALLURGICA, 1989, 23 (05) :697-702
[10]   EFFECT OF ELECTRIC-FIELD ON CAVITATION IN SUPERPLASTIC ALUMINUM-ALLOY 7475 [J].
CONRAD, H ;
CAO, WD ;
LU, XP ;
SPRECHER, AF .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 138 (02) :247-258