Detection of the gasoline components methyl tert-butyl ether, benzene, toluene, and m-xylene using ion mobility spectrometers with a radioactive and UV ionization source

For the first time, ion mobility spectrometers (IMS) with radioactive and UV ionization sources in combination with multicapillary columns (MCCs) have been used to determine methyl tent-butyl ether (MTBE), a gasoline additive, in water and nitrogen as well as the monoaromatic compounds benzene, toluene, and m-xylene (BTX). A membrane extraction unit was set up to extract the substances from water, which is simple, effective, and easy to automate for further applications. Thus, the detection of MTBE and BTX of gasoline vapors was accomplished after a preliminary silicone membrane extraction. Two-dimensional data analyses of IMS-chromatograms allow us to separate these substances clearly according to their different retention and drift times. Method detection limits for MTBE were 2 mug/L (UV) and 30 pg/L (Ni-63) in nitrogen and 20 mg/L (UV) and 1mug/L (Ni-63) in water. Rather a good reproducibility was achieved with relative standard deviations of between 2.9 and 9%. The method presented in this article has been proven to be suitable for nearly real-time monitoring as the total analysis time is less than 90 s. As an example of application, the detection of MTBE and BTX in a mixture of volatile organic compounds of pure gasoline using the 2-D IMS-chromatogram is presented.