Effects of molecular interface modification in hybrid organic-inorganic photovoltaic cells

被引:410
作者
Goh, Chiatzun [1 ]
Scully, Shawn R. [1 ]
McGehee, Michael D. [1 ]
机构
[1] Stanford Univ, Dept Mat Sci & Engn, Stanford, CA 94305 USA
关键词
D O I
10.1063/1.2737977
中图分类号
O59 [应用物理学];
学科分类号
摘要
We have systematically investigated the effects of surface modification of titania (TiO2) in hybrid TiO2/regioregular poly(3-hexylthiophene) (P3HT) photovoltaic cells. By employing a series of para-substituted benzoic acids with varying dipoles and a series of multiply substituted benzene carboxylic acids, the energy offset at the TiO2/polymer interface and thus the open-circuit voltage of devices can be tuned systematically by 0.25 V. Transient photovoltage measurements showed that the recombination kinetics was dominated by charge carrier concentration in these devices and were closely associated with the dark current. The saturated photocurrent of TiO2/P3HT devices exhibited more than a twofold enhancement when molecular modifiers with large electron affinity were employed. The ability of modifiers to accept charge from polymers, as revealed in photoluminescence quenching measurement with blends of polymers, was shown to be correlated with the enhancement in device photocurrent. A planar geometry photoluminescence quenching measurement showed that TiO2 substrates modified by these same molecules that accept charge quenched more excitons in regioregular P3HT than bare TiO2 surfaces. An exciton diffusion length in P3HT as large as 6.5-8.5 nm was extracted. By measuring the external quantum efficiency (EQE) of working devices, it was found that all of the excitons that were quenched were accountable as extracted photocurrent. EQE was effectively increased from 5% to 10%-14% with certain surface modifiers; consequently exciton harvesting was more than doubled. The use of ruthenium (II) sensitizing dyes with good exciton harvesting property coupled with suppression of the recombination kinetics improved the efficiency of optimized bilayer TiO2/P3HT devices from 0.34% to 0.6% under AM 1.5 solar illuminations. The implication of this work is directly relevant to the design of nanostructured bulk heterojunction inorganic-organic cells, in which efficient exciton harvesting and control of the recombination kinetics are key to achieving high efficiency. (c) 2007 American Institute of Physics.
引用
收藏
页数:12
相关论文
共 74 条
  • [1] Ultrafast and long-lived photoinduced charge separation in MEH-PPV/nanoporous semiconductor thin film composites
    Anderson, NA
    Hao, EC
    Ai, X
    Hastings, G
    Lian, TQ
    [J]. CHEMICAL PHYSICS LETTERS, 2001, 347 (4-6) : 304 - 310
  • [2] Arango AC, 2000, ADV MATER, V12, P1689, DOI 10.1002/1521-4095(200011)12:22<1689::AID-ADMA1689>3.0.CO
  • [3] 2-9
  • [4] Molecular engineering of semiconductor surfaces and devices
    Ashkenasy, G
    Cahen, D
    Cohen, R
    Shanzer, A
    Vilan, A
    [J]. ACCOUNTS OF CHEMICAL RESEARCH, 2002, 35 (02) : 121 - 128
  • [5] Solid-state dye-sensitized mesoporous TiO2 solar cells with high photon-to-electron conversion efficiencies
    Bach, U
    Lupo, D
    Comte, P
    Moser, JE
    Weissörtel, F
    Salbeck, J
    Spreitzer, H
    Grätzel, M
    [J]. NATURE, 1998, 395 (6702) : 583 - 585
  • [6] Modeling the current-voltage characteristics of bilayer polymer photovoltaic devices
    Barker, JA
    Ramsdale, CM
    Greenham, NC
    [J]. PHYSICAL REVIEW B, 2003, 67 (07)
  • [7] Infiltration of regioregular poly[2,2′-(3-hexylthiopene)] into random nanocrystalline TiO2 networks
    Bartholomew, GP
    Heeger, AJ
    [J]. ADVANCED FUNCTIONAL MATERIALS, 2005, 15 (04) : 677 - 682
  • [8] Efficient hybrid solar cells from zinc oxide nanoparticles and a conjugated polymer
    Beek, WJE
    Wienk, MM
    Janssen, RAJ
    [J]. ADVANCED MATERIALS, 2004, 16 (12) : 1009 - +
  • [9] Beek WJE, 2002, ADV FUNCT MATER, V12, P519, DOI 10.1002/1616-3028(20020805)12:8<519::AID-ADFM519>3.0.CO
  • [10] 2-K