Mode-mismatched thermal lens spectrometry for thermo-optical properties measurement in optical glasses: a review

In this work, the application of thermal lens spectrometry (TLS) to study thermo-optical and spectroscopic properties of optical glasses is described. The theoretical basis for quantitative measurements is discussed together with the advantages and limitations of the method as compared with conventional measurements. The technique is applied to determine the thermal diffusivities, temperature coefficient of optical path length changes, ds/dT, and the fluorescence quantum efficiencies of several glasses such as fluorides, chalcogenides, chalcohalides, soda lime and low silica calcium aluminosilicate. For some of these glasses, the effect of glass composition on thermo-optical properties was studied. For aluminosilicate glasses was observed an 8% decrease of the thermal diffusivity with the increase of Nd2O3 doping. Five kinds of fluoride glasses were studied and it was observed that fluorindate and fluoaluminate present better thermooptical properties compared to fluorozirconate glasses: thermal diffusivity similar to 20% higher and ds/dT similar to 50% lower (in modulus). All fluoride glasses had negative ds/dT and all the other glasses a positive ds/dT. For fluoride glasses, the TLS measurements were performed up to the glass transition temperature (T-g). Near T-g thermal diffusivity decreases and ds/dT increases, both by one order of magnitude. The TLS was used to determine fluorescence quantum efficiency and concentration quenching in Nd3+-doped glasses (aluminosilicate and fluorozirconate). These results were compared with the Judd-Ofelt calculations. (C) 2000 Elsevier Science B.V. All rights reserved.