Interfacial reactions of lead-free Sn-Zn based solders on Cu and Cu plated electroless Ni-P/Au layer under aging at 150 °C

被引:47
作者
Huang, CW [1 ]
Lin, KL [1 ]
机构
[1] Natl Cheng Kung Univ, Dept Mat Sci & Engn, Tainan 701, Taiwan
关键词
D O I
10.1557/JMR.2004.0458
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The interfacial reactions of Sn-Zn based solder on Cu and Cu/Ni-P/Cu-plating substrates under aging at 150 degreesC were investigated in this study. The compositions of solders investigated were Sn-9Zn, Sn-8.55Zn-0.45Al, and Sn-8.55Zn-0.45Al-0.5Ag solders in weight percent. The experimental results indicated that the Cu substrate formed Cu5Zn8 with the Sn-9Zn solder and Al-Cu-Zn compound with Al-containing solders. However, it was detected that Cu6Sn5 formed at the Sn-9Zn/Cu interface and Cu5Zn8 formed at the M-containing solders/Cu interface after aging for 1000 h. When it contacted with the Cu/Ni-P/Au substrate, the Sn-9Zn solder formed Au-Zn compound, and the Al-containing solders formed Al-Cu-Zn compound at the interface. After a long aging time, the intermetallic compounds existing between solders and the Cu/Ni-P/Au metallization layers almost did not grow. It was found that the interdiffusion between solders and Cu/Ni-P/Au was slower than that with Cu under aging. Furthermore, the addition of Ag to Sn-Zn solder resulted in the formation of AgZn3 particles at the interface.
引用
收藏
页码:3560 / 3568
页数:9
相关论文
共 22 条
[1]   Lead-free solders in microelectronics [J].
Abtew, M ;
Selvaduray, G .
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2000, 27 (5-6) :95-141
[2]   Influence of P content in electroless plated Ni-P alloy film on interfacial structures and strength between Sn-Zn solder and plated Au/Ni-P alloy film [J].
Chonan, Y ;
Komiyama, T ;
Onuki, J ;
Urao, R ;
Kimura, T ;
Nagano, T .
MATERIALS TRANSACTIONS, 2002, 43 (08) :1887-1890
[3]   Microstructures and mechanical properties of Sn-8.55Zn-0.45A1-XAg solders [J].
Huang, CW ;
Lin, KL .
JOURNAL OF MATERIALS RESEARCH, 2003, 18 (07) :1528-1534
[4]  
HUANG CW, 2004, MAT T JIM, V45, P1
[5]  
HULTGREN R, 1963, SELECTED VALUES THER, P712
[6]   DEVELOPING LEAD-FREE SOLDERS - A CHALLENGE AND OPPORTUNITY [J].
JIN, SH .
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, 1993, 45 (07) :13-13
[7]   Effect of isothermal aging on ball shear strength in BGA joints with Sn-3.5Ag-0.75Cu solder [J].
Lee, CB ;
Jung, SB ;
Shin, YE ;
Shur, CC .
MATERIALS TRANSACTIONS, 2002, 43 (08) :1858-1863
[8]   Thermodynamic prediction of interface phases at Cu/solder joints [J].
Lee, HM ;
Yoon, SW ;
Lee, BJ .
JOURNAL OF ELECTRONIC MATERIALS, 1998, 27 (11) :1161-1166
[9]   High-temperature oxidation of a Sn-Zn-Al solder [J].
Lin, KL ;
Liu, TP .
OXIDATION OF METALS, 1998, 50 (3-4) :255-267
[10]   Sn-Zn-AlPb-free solder - An inherent barrier solder for Cu contact [J].
Lin, KL ;
Hsu, HM .
JOURNAL OF ELECTRONIC MATERIALS, 2001, 30 (09) :1068-1072