Evaluation of mechanical properties using shear-punch testing

被引:236
作者
Guduru, RK [1 ]
Darling, KA
Kishore, R
Scattergood, RO
Koch, CC
Murty, KL
机构
[1] NC State Univ, Dept Mat Sci & Engn, Raleigh, NC 27606 USA
[2] BARC, Div Mat Sci, Bombay 400085, Maharashtra, India
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2005年 / 395卷 / 1-2期
基金
美国国家科学基金会;
关键词
shear-punch test; mechanical properties; yield strengths specimen thickness; die-punch clearance;
D O I
10.1016/j.msea.2004.12.048
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The evaluation of mechanical properties like yield and ultimate tensile strengths from shear-punch tests is important when the availability of material is limited. A shear-punch test setup was built in our laboratory and the mechanical properties for different materials mild steel, pure Al. Zn, brass (Cu-30% Zn by wt.), Al 6061, Austenitic and Martensitic stainless steels were evaluated. A new method using 1% offset criterion in conjunction with normalized shear-punch curves was used to measure the shear yield strength. A linear Correlation between the shear data and tensile data was established for yield and ultimate strengths. The variation of the yield and ultimate shear strength was studied as a function of the sample thickness and die-punch clearance for soft, medium and high strength materials. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:307 / 314
页数:8
相关论文
共 20 条
[1]  
[Anonymous], ASTM STP S
[2]  
GEORGE E, 1986, DIETER MECH METALLUR, P76
[3]  
Guduru RK, 2004, ULTRAFINE GRAINED MATERIALS III, P565
[4]   Effect of low temperature irradiation on the mechanical properties of ternary V-Cr-Ti alloys as determined by tensile tests and shear punch tests [J].
Hamilton, ML ;
Toloczko, MB .
JOURNAL OF NUCLEAR MATERIALS, 2000, 283 (PART I) :488-491
[5]   Shear punch and tensile measurements of mechanical property changes induced in various austenitic alloys by high-energy mixed proton and neutron irradiation at low temperatures [J].
Hamilton, ML ;
Garner, FA ;
Toloczko, MB ;
Maloy, SA ;
Sommer, WF ;
James, MR ;
Ferguson, PD ;
Louthan, MR .
JOURNAL OF NUCLEAR MATERIALS, 2000, 283 (283-287) :418-422
[6]  
HAMILTON ML, 1995, FORSCHUNGSZENTRUM JU, P46
[7]   Shear punch testing of 59Ni isotopically-doped model austenitic alloys after irradiation in FFTF at different He/dpa ratios [J].
Hankin, GL ;
Toloczko, MB ;
Hamilton, ML ;
Garner, FA ;
Faulkner, RG .
JOURNAL OF NUCLEAR MATERIALS, 1998, 258 :1657-1663
[8]   Validation of the shear punch tensile correlation technique using irradiated materials [J].
Hankin, GL ;
Toloczko, MB ;
Hamilton, ML ;
Faulkner, RG .
JOURNAL OF NUCLEAR MATERIALS, 1998, 258 :1651-1656
[9]   An investigation into the origin and nature of the slope and x-axis intercept of the shear punch-tensile yield strength correlation using finite element analysis [J].
Hankin, GL ;
Toloczko, MB ;
Johnson, KI ;
Khaleel, MA ;
Hamilton, ML ;
Garner, FA ;
Davies, RW ;
Faulkner, RG .
EFFECTS OF RADIATION ON MATERIALS: 19TH INTERNATIONAL SYMPOSIUM, 2000, 1366 :1018-1028
[10]  
IGATA N, 1986, ASTM STP, V888, P161