Support technologies for deep and complex roadways in underground coal mines: a review

被引：62

作者：

Kang H. ^{[1
,2
]}

机构：

[1] Coal Mining and Designing Branch, China Coal Research Institute, Beijing

[2] State Key Laboratory of Coal Mining and Clean Utilization, China Coal Research Institute, Beijing

来源：

International Journal of Coal Science & Technology | 2014年 / 1卷 / 3期

关键词：

Coal mines; Combined supports; Deep and complex roadways; Grouting; Rock bolts; Steel supports;

D O I：

10.1007/s40789-014-0043-0

中图分类号：

学科分类号：

摘要：

Based on geological and mining characteristics, coal mine roadways under complex conditions were divided into five types, for each type the deformation and damage characteristics of rocks surrounding roadways were analyzed. The recent developments of roadway support technologies were introduced abroad, based on the experiences of supports for deep and complex roadways from Germany, the United States and Australia. The history and achievements of roadway support technologies in China were detailed, including rock bolting, steel supports, grouting reinforcement and combined supports. Four typical support and reinforcement case studies were analyzed, including a high stressed roadway 1,000 m below the surface, a roadway surrounded by severely weak and broken rocks, a chamber surrounded by weak and broken rocks, and a roadway with very soft and swelling rocks. Based on studies and practices in many years, rock bolting has become the mainstream roadway support form in China coal mines, and steel supports, grouting reinforcement and combined supports have also been applied at proper occasions, which have provided reliable technical measures for the safe and high effective construction and mining of underground coal mines. © 2014, The Author(s).

引用

页码：261 / 277

页数：16

共 49 条

[41] Shi Y.W., Zhang S.T., Yin S.K., Rui S.S., Li C.X., The strata control technology for deep coal mining at home and abroad, (2009)
[42] Shi Y.W., Qi Q.X., Gu Q.Z., Study on rock burst prevention and ground control in coal mine abroad, (2013)
[43] Song G., Stankus JC (1997) Control mechanism of a tensioned bolt system in the laminated roof with a large horizontal stress, The 16th international conference on ground control in mining, pp. 167-172
[44] Tian L., Xie W.B., Jing S.G., Xing Y.D., Peng J.P., Framed timber and anchor coupling collective support technology for fully mechanized top coal mining face crossing over gateway, Coal Sci Technol 39(11), 62, pp. 44-47, (2011)
[45] Villaescusa E., Schubert C.J., Monitoring the performance of rock reinforcement, Geotech Geol Eng, 17, 3, pp. 321-333, (1999)
[46] Wang L.G., Li M.Y., Wang X.Z., Study of mechanisms and technology for bolting and grouting in special soft rock roadways under high stress, Chin J Rock Mech Eng, 24, 16, pp. 2889-2893, (2005)
[47] Wu Z.X., Zhao Y.L., Liang J.J., Li A.H., Li G.X., Pre-stressed grout bolting technology applied to reinforcement of mine large cross section roadway, Coal Sci Technol, 29, 8, pp. 10-12, (2001)
[48] Xie W.B., Jing S.G., Wang T., Ren Y.K., Zhang N., Structural stability of U-steel support and its control technology, Chin J Rock Mech Eng, 29, pp. 3743-3748, (2010)
[49] Zhang N., Gao M.S., High-strength and pretension bolting support of coal roadway and its appication[J], J China Univ Min Technol, 33, 5, pp. 524-527, (2004)

← 1 2 3 4 5 →