ONLINE MONITORING AND CONTROL OF ACETONE-BUTANOL FERMENTATION BY MEMBRANE-SENSOR MASS-SPECTROMETRY

A mass spectrometry (MS) membrane sensor was developed and applied to on-line product measurement in acetone-butanol fermentation. The sensor facilitated the monitoring of acetone, butanol, ethanol, H-2 and CO2, and single-compound calibration curves for both acetone and butanol showed a linear relationship between the product concentration and the MS response. However, when an actual fermentation was monitored, the product concentration calculated from the MS response was smaller than the concentration determined by gas chromatography, and the relationship between the response and the product concentration was nonlinear. It was found that large amounts of gases (H-2, CO2) entering the MS analyzation chamber were causing a 'space charge effect', which resulted in an MS response ceiling. The problem could be resolved by reducing the surface area of the sensor membrane. Under some fermentation conditions, a by-product, n-butyl butyrate, was produced, and this interfered with the measurement of butanol due to a peak overlapping effect. However, it was found that this could be compensated for by using an empirical equation. Application of the MS membrane sensor in a fed batch culture of acetone-butanol fermentation resulted in successful control of the butanol concentration.