ANALYSIS OF DEFORMED YBA2CU3O7-DELTA

In this study, polycrystalline YBa2Cu3O7-δ (123) was deformed under controlled conditions with a confining pressure of 1.0GPa, temperatures of 25, 500 and 800° C, and a strain rate of 10-4 sec-1 in order to ascertain the micromechanisms of deformation that give rise to the macroscopic plastic behaviour. The deformed material was analysed using optical microscopy, transmission electron microscopy (TEM), and a SQUID magnetometer to study the effects of deformation on the microstructure of YBa2Cu3O7-δ and how changes in the microstructure affected the superconducting properties. The results of these preliminary experiments suggest that the 123 material will be very difficult to deform plastically as slip occurs only on the (001) plane. The lack of multiple slip systems implies that this material will show some brittle behaviour up to a very high homologous temperature. Even when plastic behaviour can be sustained for high strains it may require high annealing temperatures to remove lattice imperfections which impede the superconducting currents. Densification by high pressure deformation may make reoxygenation difficult due to the reduced diffusion rates between the grains. These factors combined suggest that traditional fabrication techniques are not applicable to the 123 material. More work needs to be carried out to determine how annealing affects the microstructures of deformed materials and how these changes in microstructure affect the superconducting properties of these materials. © 1990 Chapman and Hall Ltd.