COMPARISON OF TRANSIENT AND STATIONARY NEUTRAL PRESSURE RESPONSE IN THE DIII-D ADVANCED DIVERTOR

被引：4

作者：

KLEPPER, CC ^{[1
]}

HOGAN, JT ^{[1
]}

MIODUSZEWSKI, PK ^{[1
]}

MAHDAVI, MA ^{[1
]}

MAINGI, R ^{[1
]}

OWEN, LW ^{[1
]}

SCHAFFER, MJ ^{[1
]}

BUCHENAUER, D ^{[1
]}

EVANS, TE ^{[1
]}

GILLIGAN, JG ^{[1
]}

HAAS, G ^{[1
]}

HILL, DN ^{[1
]}

JACKSON, GL ^{[1
]}

PETRIE, TW ^{[1
]}

机构：

[1] OAK RIDGE NATL LAB,OAK RIDGE,TN 37831

来源：

JOURNAL OF NUCLEAR MATERIALS | 1992年 / 196卷

关键词：

D O I：

10.1016/S0022-3115(06)80201-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The DIII-D divertor baffle system was designed to facilitate density control in long pulse H-mode discharges by removing a particle flux equal to the neutral beam fueling rate (approximately 20 Torrl/s) with a approximately 1 mTorr neutral pressure under the baffle (p0). Initial measurements of the baffle pressure indicated that p0 approximately 10 mTorr (without pumping or biasing), a value much in excess of that required for long pulse density control. Radial sweeps of the X-point position have been employed to determine the maximum p0, as well as to establish the dependence of this pressure on geometry. An estimate of the particle equilibration time for the baffle system has been made by studying the baffle pressure response to ''giant'' ELM effects. ''Steady state'' experiments in which the X-point position was fixed for approximately 2.5 s have also been carried out and steady baffle pressures were observed. The scaling of baffle pressure with plasma parameters has been found to be similar under transient and ''steady state'' conditions. Detailed modeling of these experiments with the B2, DEGAS, and WDIFFUSE (wall model) codes has been performed.

引用

页码：1090 / 1095

页数：6

共 15 条

[11] RECONSTRUCTION OF CURRENT PROFILE PARAMETERS AND PLASMA SHAPES IN TOKAMAKS [J].