ESTIMATIONS OF STRESS INTENSITY FACTORS FOR SMALL CRACKS AT NOTCHES

被引:112
作者
KUJAWSKI, D
机构
[1] Department of Mechanical Engineering, University of Alberta, Edmonton, Alberta
[2] Institute of Machine Design Fundamentals, Warsaw Technical University, Warsaw, 02-524
关键词
D O I
10.1111/j.1460-2695.1991.tb00005.x
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
This paper presents a simple method for determining the stress intensity factors for small notch-emanating cracks. The proposed method is based on similarities between elastic notch-tip stress fields described by two parameters; the stress concentration factor K(t) and the notch-tip radius rho. The method developed here is rather general, and can be used for a variety of central and edge notches with through-thickness of semi-elliptical cracks. The predicted values are in good agreement with the available numerical data.
引用
收藏
页码:953 / 965
页数:13
相关论文
共 22 条
[11]  
Glinka G., Calculation of inelastic notch‐tip strain‐stress histories under cyclic loading, Engng Fract. Mech., 22, pp. 839-854, (1983)
[12]  
Thimoshenko S., Goodier J.N., Theory of Elasticity, (1951)
[13]  
Usami S., Short crack fatigue properties and component life estimation, Current Research or Fatigue Cracks, (1985)
[14]  
Glinka G., Newport A., Universal features of elastic notch‐tip stress fields, Int. J. Fatigue, 9, pp. 143-150, (1987)
[15]  
Armen H., Pifko A., Levine S., (1971)
[16]  
Shin C.S., A discussion on various estimations of elastic stress distribution on stress concentration factors for sharp edge notches, Int. J. Fatigue, 8, pp. 235-237, (1986)
[17]  
Theocaris P.S., Marketos F., Elastic‐plastic strain and stress distribution in notched plate's under plane stress, J. Mech. Phys. Solids, 11, pp. 411-428, (1963)
[18]  
Howland R.C.J., On the stress in the neighborhood of a circular hole in a strip under tension, Trans. R. Soc., Lond. Ser. A, 229, pp. 49-86
[19]  
Schijve J., (1980)
[20]  
Rooke P.P., Cartwright D.J., Compendium of stress intensity factors, (1976)