ALL-SOLID-STATE POLY(VINYL CHLORIDE) MEMBRANE ION-SELECTIVE ELECTRODES WITH POLY(3-OCTYLTHIOPHENE) SOLID INTERNAL CONTACT

被引:167
作者
BOBACKA, J [1 ]
MCCARRICK, M [1 ]
LEWENSTAM, A [1 ]
IVASKA, A [1 ]
机构
[1] ABO AKAD UNIV,ANALYT CHEM LAB,SF-20500 TURKU,FINLAND
关键词
SOLID-STATE ION-SELECTIVE ELECTRODE; SOLID-CONTACT ELECTRODE; CONDUCTING POLYMER; POLY(3-OCTYLTHIOPHENE); IMPEDANCE;
D O I
10.1039/an9941901985
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
All-solid-state ion-selective electrodes were prepared by using poly(3-octylthiophene) (POT) as solid contact material. A film of POT (thickness approximately 0.25 mu m was deposited on a solid substrate (platinum, gold or glassy carbon) by electrochemical polymerization of 3-octylthiophene. The POT layer was subsequently coated with an ion-selective membrane (ISM) to produce a solid-contact ion-selective electrode (SCISE), SCISEs for several ions (Li+, Ca2+ and Cl-) were prepared and investigated. The compositions of the ion-selective membranes were the same as normally used for the same ions in poly(vinyl chloride) (PVC)-based ion-selective electrodes (ISEs) with internal filling solution. The potentiometric response of the SCISEs was studied and compared with that of coated-wire electrodes (CWEs) prepared by coating the bare substrate with the same ion-selective membrane. The potentiometric slopes, limits of detection and response times of the SCISEs were similar to those of the corresponding CWEs, but the long-term stability of the potential was different for the two type of electrodes. The SCISEs exhibited a more stable electrode potential than the corresponding CWEs. However, the stability of the SCISEs was found to be influenced by the substrate material and this was studied in detail for the Ca-SCISE and Ca-CWE. For comparison, a Ca-ISE with internal filling solution was also used. By using glassy carbon as the substrate it was possible to obtain a Ca-SCISE exhibiting a standard potential that was almost as stable (E(SCISE) = 259.3 +/- 1.3 mV, drift = 0.23 mV d(-1)) as for the conventional Ca-ISE (E(ISE) = 61.4 +/- 0.5 mV, drift = 0.16 mV d(-)) and significantly more stable than for the Ca-CWE, during a time period of 8 d. The most stable Ca-CWE, prepared by using glassy carbon as substrate, showed a potential drift of -3.8 mV d(-1) (E(CWE) = 269.6 +/- 10.2 mV) during testing for 8 d. Electrochemical impedance spectrometry was used to understand the charge-transfer mechanisms of the different types of ion-selective electrodes studied. The impedance response of the electrodes was modelled by equivalent electrical circuits.
引用
收藏
页码:1985 / 1991
页数:7
相关论文
共 30 条
  • [11] ALL-SOLID-STATE SODIUM-SELECTIVE ELECTRODE BASED ON A CALIXARENE IONOPHORE IN A POLY(VINYL CHLORIDE) MEMBRANE WITH A POLYPYRROLE SOLID CONTACT
    CADOGAN, A
    GAO, ZQ
    LEWENSTAM, A
    IVASKA, A
    DIAMOND, D
    [J]. ANALYTICAL CHEMISTRY, 1992, 64 (21) : 2496 - 2501
  • [12] COATED WIRE ION SELECTIVE ELECTRODES
    CATTRALL, RW
    FREISER, H
    [J]. ANALYTICAL CHEMISTRY, 1971, 43 (13) : 1905 - &
  • [13] CATTRALL RW, 1984, ION SEL ELECTRODE R, V6, P125
  • [14] STUDY OF PROTEIN EFFECT ON CALCIUM-ION-SELECTIVE MEMBRANES BY USING AC IMPEDANCE METHODS
    COVINGTON, AK
    ZHOU, DM
    [J]. JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 1992, 341 (1-2): : 77 - 84
  • [15] AC-IMPEDANCE PROPERTIES OF ETH1001-BASED CALCIUM-ION SELECTIVE MEMBRANES
    COVINGTON, AK
    ZHOU, DM
    [J]. ELECTROCHIMICA ACTA, 1992, 37 (15) : 2691 - 2694
  • [16] PLASTICIZED POLYVINYL-CHLORIDE) PROPERTIES AND CHARACTERISTICS OF VALINOMYCIN ELECTRODES .1. HIGH-FREQUENCY RESISTANCES AND DIELECTRIC-PROPERTIES
    HORVAI, G
    GRAF, E
    TOTH, K
    PUNGOR, E
    BUCK, RP
    [J]. ANALYTICAL CHEMISTRY, 1986, 58 (13) : 2735 - 2740
  • [17] THE USE OF ELECTROPOLYMERIZATION TO PRODUCE NEW SENSING SURFACES - A REVIEW EMPHASIZING ELECTRODEPOSITION OF HETEROAROMATIC-COMPOUNDS
    IMISIDES, MD
    JOHN, R
    RILEY, PJ
    WALLACE, GG
    [J]. ELECTROANALYSIS, 1991, 3 (09) : 879 - 889
  • [18] JANATA J, 1990, CONTEMPORARY ELECTROANALYTICAL CHEMISTRY, P159
  • [19] MECHANISM OF IONIC AND REDOX SENSITIVITY OF P-TYPE CONDUCTING POLYMERS .1. THEORY
    LEWENSTAM, A
    BOBACKA, J
    IVASKA, A
    [J]. JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 1994, 368 (1-2): : 23 - 31
  • [20] MACDONALD JR, 1992, LEVM V 5 0