PLASMA-SPRAYED HYDROXYLAPATITE COATING ON CARBON-FIBER-REINFORCED THERMOPLASTIC COMPOSITE-MATERIALS

Plasma-spraying of metallic implant surfaces is an established method for the application of hydroxylapatite (HA) coatings. Carbon fibre reinforced thermoplastics show different thermal and mechanical properties, compared with titanium substrates. In this paper first results of the influence of the established coating method on carbon fibre reinforced thermoplastics are presented. First investigations of the tensile adhesion strength, tested with a newly developed testing device, showed that the adhesion between the HA coating and the carbon fibre reinforced polyetheretherketone (PEEK) composite is very low. Macromechanical bending tests showed a change to initial tensile instead of compression failure of the coated composite substrate. Micromechanical bending tests in a scanning electron microscope (SEM) hot tensile stage (Raith GmbH) revealed crack propagation within the ceramic coating and in the coating-substrate interface before the total failure of the composite substrate occurred.