THE EFFECT OF HIGH-TEMPERATURE INTERMETALLIC GROWTH ON BALL SHEAR-INDUCED CRATERING

This study investigated the effect of the growth of additional gold-aluminum intermetallics at elevated temperatures on ball shear-induced silicon cratering. A mechanism was proposed that explains the high incidence of silicon cratering when thermosonic gold ball bonds are sheared from aluminum metallized pads over silicon and SiO2. This mechanism is based on the transmission of energy from the ball shear ram through the rigid intermetallic weld to the underlying dielectric. The concentration of this tranmsitted energy in the form of stress concentrators was estimated, using finite element modeling, to be highly dependent on ball and weld geometry. This failure mode does not require that the substrate be cracked initially through the use of improper bonding conditions as cratering was observed to occur even though the range of bonding parameters used in this study produced no visible damage to the underlying dielectric material. This mechanism may be partly responsible for shear-induced cratering in plastic-encapsulated packages. Recommendations are made regarding steps that can be taken to reduce this effect by altering bonding parameters, pad metal thickness, and cure schedule. © 1990 IEEE.