Plasma spray: Study of the coating generation

被引:64
作者
Fauchais, P [1 ]
Vardelle, M [1 ]
Vardelle, A [1 ]
Bianchi, L [1 ]
机构
[1] CEA,DAM B3,F-91680 BRUYERES CHATEL,FRANCE
关键词
D O I
10.1016/0272-8842(95)00106-9
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
A plasma sprayed coating is built up particle by particle, resulting in a coating with a layered structure that is highly anisotropic. The spray parameters affect certain factors of the coating, such as the size and distribution of porosity, oxide content, residual stresses, macro and microcracks, factors which have an important influence on the performance and eventual failure of the coating. Many works (modelling and measurements) have been devoted to the particles in flight and how these parameters are influenced by the plasma jets and particle injection macroscopic parameters. However, there is a shortage of published information on the way the particles spread upon impact and solidify on the substrate or the previously deposited layers and how these phenomena are connected to the deposit microstructure. This paper was concerned with expanding our knowledge in this field by concentrating on the following: modelling of deformation and solidification of a droplet on a substrate; measurement of the splat formation and cooling; experimental results and comparison with models.
引用
收藏
页码:295 / 303
页数:9
相关论文
共 43 条
[31]  
MOREAU C, 1992, J THERM SPRAY TECHN, V1, P317
[32]   A SIMPLE PROCEDURE FOR THE CHARACTERIZATION OF SPRAY DEPOSITION PROCESSES - THE LINESCAN TEST [J].
ROBERTS, KA ;
CLYNE, TW .
SURFACE & COATINGS TECHNOLOGY, 1990, 41 (01) :103-115
[33]   MICROSTRUCTURAL INVESTIGATION OF PLASMA-SPRAYED ALUMINUM COATINGS [J].
SAFAI, S ;
HERMAN, H .
THIN SOLID FILMS, 1977, 45 (02) :295-307
[34]  
SHNAKOV AM, 1986, FIZIKA KHIMIYA OBRAB, V20, P66
[35]  
SMITH RW, 1991, POWDER METALL INT, V23, P147
[36]  
SOLOLENKO OP, 1989, HIGH TEMPERATURE DUS, P419
[37]   TRANSIENT-RESPONSE OF ONE-COLOR AND 2-COLOR OPTICAL PYROMETRY SYSTEMS [J].
SPJUT, RE .
OPTICAL ENGINEERING, 1987, 26 (05) :467-472
[38]   MATHEMATICAL-MODELING OF THE ISOTHERMAL IMPINGEMENT OF LIQUID DROPLETS IN SPRAYING PROCESSES [J].
TRAPAGA, G ;
SZEKELY, J .
METALLURGICAL TRANSACTIONS B-PROCESS METALLURGY, 1991, 22 (06) :901-914
[39]   DIAGNOSTICS FOR PARTICULATE VAPORIZATION AND INTERACTIONS WITH SURFACES [J].
VARDELLE, A ;
VARDELLE, M ;
FAUCHAIS, P .
PURE AND APPLIED CHEMISTRY, 1992, 64 (05) :637-644
[40]  
VARDELLE A, 1995, J THERMAL SPRAY TECH, V4, P50