Prophylactic Vertebroplasty May Reduce the Risk of Adjacent Intact Vertebra From Fatigue Injury An Ex Vivo Biomechanical Study

被引:71
作者
Chiang, Chun-Kai
Wang, Yao-Hung [2 ]
Yang, Chung-Yi [2 ]
Yang, Been-Der
Wang, Jaw-Lin [1 ]
机构
[1] Natl Taiwan Univ, Inst Biomed Engn, Coll Med, Taipei 10051, Taiwan
[2] Natl Taiwan Univ Hosp, Dept Med Imaging, Taipei, Taiwan
关键词
intact-augmented vertebrae; bone cement; strain compliance; vertebral height; bone mineral density; COMPRESSION FRACTURES; PERCUTANEOUS VERTEBROPLASTY; CEMENT AUGMENTATION; BODY FRACTURE; LOAD-TRANSFER; KYPHOPLASTY; POLYMETHYLMETHACRYLATE; DEFORMITY; STIFFNESS; STRENGTH;
D O I
10.1097/BRS.0b013e31819481b1
中图分类号
R74 [神经病学与精神病学];
学科分类号
100204 [神经病学];
摘要
Study Design. In vitro biomechanical study using human spine specimens. Objective. To find the biomechanical consequences of prophylactic vertebroplasty post fatigue loading. Summary of Background Data. Percutaneous vertebroplasty man be an effective treatment for osteoporotic vertebral compression fracture. One frequently observed complication post surgery is the adjacent vertebral failure (AVF). The prophylactic vertebroplasty was proposed to prevent the AVF. The vertebroplasty is, nevertheless, an invasive intervention. More scientific proves are needed for the application of this surgery on a still intact vertebra. Methods. Fourteen 5-level fresh human cadaveric thoracic motion segments were divided into standard and prophylactic group. Both ends of the specimen were mounted, leaving the center 3 vertebrae free. The lower level of free vertebrae was artificially injured and cement augmented. The center level vertebra of standard group remained intact and nonaugmented. The center level vertebra of prophylactic group also remained intact, but augmented with bone cement. The specimen was applied with a 2-hour, 5-Hz, 630-N (mean) compressive fatigue loading. Impulse test and CT scanning were conducted both before and after fatigue loading to find the variance of strain compliance of cortical shell and height of vertebral body. Results. The strain compliance of cortical shell is generally not statistically significantly affected by the fatigue loading, cement augmentation and vertebral level (All P > 0.05). The only exception is that the cortical strain compliance of augmented vertebrae tentatively decreased post fatigue loading (P = 0.012 for tensile strain compliance, and P = 0.049 for compressive strain compliance). The height loss of intact vertebra adjacent to a 2-level augmented (or intact-augmented) vertebra is significantly lower than the one adjacent to a 1-level augmented (or injury-augmented) vertebra (P = 0.014). For an osteoporotic vertebra, neither cortical strain compliance nor vertebral height loss is connected with bone mineral density (all P > 0.05). Conclusion. The strain compliance of cortical shell is generally not a sensitive indicator to predict risk of fatigue injury if the fatigue loading is mild. The prophylactic augmentation strengthens the osteoporotic vertebrae, decreases the progression of vertebral height loss, reduces the anterior body shift, and hence protects the adjacent intact vertebra from elevated flexion bending. It can be cautiously suggested that if the vertebra is osteoporotic and adjacent level is located at pivot or lordotic level of spinal column, the prophylactic augmentation may be an option to prevent the AVF.
引用
收藏
页码:356 / 364
页数:9
相关论文
共 36 条
[1]
The use of an injectable, biodegradable calcium phosphate bone substitute for the prophylactic augmentation of osteoporotic vertebrae and the management of vertebral compression fractures [J].
Bai, B ;
Jazrawi, LM ;
Kummer, FJ ;
Spivak, JM .
SPINE, 1999, 24 (15) :1521-1526
[2]
Biomechanical explanation of adjacent fractures following vertebroplasty [J].
Baroud, G ;
Heini, P ;
Nemes, J ;
Bohner, M ;
Ferguson, S ;
Steffen, T .
RADIOLOGY, 2003, 229 (02) :606-607
[3]
Load shift of the intervertebral disc after a vertebroplasty: a finite-element study [J].
Baroud, G ;
Nemes, J ;
Heini, P ;
Steffen, T .
EUROPEAN SPINE JOURNAL, 2003, 12 (04) :421-426
[4]
Adjacent vertebral failure after vertebroplasty - A biomechanical investigation [J].
Berlemann, U ;
Ferguson, SJ ;
Nolte, LP ;
Hein, PF .
JOURNAL OF BONE AND JOINT SURGERY-BRITISH VOLUME, 2002, 84B (05) :748-752
[5]
Adjacent vertebral failure after vertebroplasty: a biomechanical study of low-modulus PMMA cement [J].
Boger, Andreas ;
Heini, Paul ;
Markus, Windolf ;
Schneider, Erich .
EUROPEAN SPINE JOURNAL, 2007, 16 (12) :2118-2125
[6]
Bostrom MP, 1997, SPINE S, V22, P38, DOI DOI 10.1097/00007632-199712151-00007
[7]
CAPPOZZO A, 1984, Journal of Orthopaedic Research, V1, P292
[8]
A human cadaver model for determination of pathologic fracture threshold resulting from tumorous destruction of the vertebral body [J].
Dimar, JR ;
Voor, MJ ;
Zhang, YM ;
Glassman, SD .
SPINE, 1998, 23 (11) :1209-1214
[9]
Thoracolumbar spine mechanics contrasted under compression and shear loading [J].
Frei, H ;
Oxland, TR ;
Nolte, LP .
JOURNAL OF ORTHOPAEDIC RESEARCH, 2002, 20 (06) :1333-1338
[10]
Biomechanical investigation of vertebroplasty in osteoporotic compression fractures and in prophylactic vertebral reinforcement [J].
Furtado, Navin ;
Oakland, Robert J. ;
Wilcox, Ruth K. ;
Hall, Richard M. .
SPINE, 2007, 32 (17) :E480-E487