Effect of RF power on optical and electrical properties of ZnO thin film by magnetron sputtering

被引:172
作者
Lu, YM [1 ]
Hwang, WS
Liu, WY
Yang, JS
机构
[1] Kun Shan Univ Technol, Dept Elect Engn, Tainan, Taiwan
[2] NCKU, Dept Mat Sci & Engn, Tainan, Taiwan
关键词
optical properties; thin film; sputtering;
D O I
10.1016/S0254-0584(01)00450-3
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Zinc oxide is an important fluorescence material due to its excellent luminescence efficiency and low voltage required to produce green light. In this study, the RF reactive magnetron sputtering system was used to deposit the transparent (ZnO:Zn) thin films on glass substrates. The effect of RF sputtering power and heat treatment on the photoluminescence (PL) and resistivity were studied. It has been found that increasing RF sputtering power improves the PL efficiency. After heat treatment in argon atmosphere, the crystalline structure of the ZnO film is improved and the (0 0 0 2) preferred orientation is enhanced. The resistivity of the as-deposited film cannot be detected. After annealing, the resistivity is in the range 10(-1)-10(-3) Omega cm(-1). (C) 2001 Elsevier Science B.V All rights reserved.
引用
收藏
页码:269 / 272
页数:4
相关论文
共 7 条
[1]   ELECTRICAL AND OPTICAL-PROPERTIES OF BIAS SPUTTERED ZNO THIN-FILMS [J].
CAPORALETTI, O .
SOLAR ENERGY MATERIALS, 1982, 7 (01) :65-73
[2]   PROPERTIES OF ZNO FILMS DEPOSITED ONTO INP BY SPRAY PYROLYSIS [J].
EBERSPACHER, C ;
FAHRENBRUCH, AL ;
BUBE, RH .
THIN SOLID FILMS, 1986, 136 (01) :1-10
[3]  
MALINOVSKA DD, 1998, MAT SCI ENG B, V52, P59
[4]  
NANTO H, 1984, J APPL PHYS, V55, P15
[5]   PREPARATION AND ELECTRICAL-PROPERTIES OF UNDOPED ZINC-OXIDE FILMS BY CVD [J].
OGAWA, MF ;
NATSUME, Y ;
HIRAYAMA, T ;
SAKATA, H .
JOURNAL OF MATERIALS SCIENCE LETTERS, 1990, 9 (11) :1351-1353
[6]  
Vossen J., 1977, PHYS THIN FILMS, V9, P1
[7]   Conductivity enhancement in transparent ZnO films via Al-doping produced by CW-CO2 laser-induced evaporation [J].
Yin, XJ ;
Lai, GR ;
Chen, JS ;
Kao, JS .
SURFACE & COATINGS TECHNOLOGY, 1997, 90 (03) :239-246