Effects of the Electrode Size and Modification Protocol on a Label-Free Electrochemical Biosensor

In the present work, the effect of a surface modification protocol along with the electrode size has been investigated for developing an efficient, label-free electrochemical biosensing method for diagnosis of traumatic brain injury (TBI) biomarkers. A microdisk electrode array (MDEA) and a macroelectrode with a comb structure (MECS) were modified with an anti-GFAP (GFAP = glial fibrillary acidic protein) antibody using two protocols for optimum and label-free detection of GEAP, a promising acute-phase TBI biomarker. For the MDEA, an array of six microdisks with a 100 mu m diameter and, for the MECS, a 3.2 mm x 5.5 mm electrode 5 mu m wide With 10 mu m spaced Comb fingers were modified using an optimized protocol for dithiobis(succinimidyl propionate) (DSP) self-assembled monolayer formation. Anti-GFAP was covalently bound, and the remaining free DSP, groups were blocked using ethanol amine (Ea). Sensors, were exposed to solutions with different GFAP concentrations, and a label-free electrochemical,1:impedance spectroscopy (EIS) technique was used to determine the concentration. EIS results confirmed that both types of Ea/anti-GFAP/DSP/Au electrodes modified with an optimized DSP-based protocol can accurately detect GFAP in the range of 1 pg mL(-1) to 100 ng mL(-1) with a detection limit of 1 pg mL(-1) However, the cross-use of the MDEA protocol on the MECS and vice versa resulted in very low sensitivity or poor signal resolution, underscoring the importance of proper Matching oldie electrode size and type and the surface modification protocol.