Through-mask electrochemical micromachining of titanium

被引：75

作者：

Madore, C ^{[1
]}

Piotrowski, O ^{[1
]}

Landolt, D ^{[1
]}

机构：

[1] Ecole Polytech Fed Lausanne, Lab Met Chim, Dept Mat, MXC Ecublens, CH-1015 Lausanne, Switzerland

来源：

JOURNAL OF THE ELECTROCHEMICAL SOCIETY | 1999年 / 146卷 / 07期

关键词：

D O I：

10.1149/1.1391966

中图分类号：

O646 [电化学、电解、磁化学];

学科分类号：

081704 ;

摘要：

Through-mask electrochemical micromachining has been employed to fabricate well-defined three-dimensional topographies in titanium. Well-controlled shapes with a smooth surface finish were obtained using optimized electrolyte composition and electrochemical parameters. The shape change resulting from electrochemical etching through patterned photoresists were numerically simulated using the boundary element method, assuming the rate of titanium dissolution to be diffusion controlled. A satisfactory agreement was found between experimentally measured and simulated etched profiles. (C) 1999 The Electrochemical Society. S0013-4651(98)10-076-9. All rights reserved.

引用

页码：2526 / 2532

页数：7

共 27 条

[21] SECONDARY CURRENT DISTRIBUTION IN A HULL CELL - BOUNDARY ELEMENT AND FINITE-ELEMENT SIMULATION AND EXPERIMENTAL-VERIFICATION [J].

MATLOSZ, M ;

CRETON, C ;

CLERC, C ;

LANDOLT, D .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1987, 134 (12) :3015-3021

[22] SHAPE CHANGES IN ELECTROCHEMICAL POLISHING - THE EFFECT OF TEMPERATURE ON THE ANODIC LEVELING OF FE-24CR [J].

MATLOSZ, M ;

LANDOLT, D .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1989, 136 (04) :919-929

[23] The mechanism of electropolishing of titanium in methanol-sulfuric acid electrolytes [J].

Piotrowski, O ;

Madore, C ;

Landolt, D .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1998, 145 (07) :2362-2369

[24] EXPERIMENTAL INVESTIGATION OF SHAPE CHANGES IN ELECTROCHEMICAL MICROMACHINING THROUGH PHOTORESIST MASKS [J].

ROSSET, E ;

LANDOLT, D .

PRECISION ENGINEERING-JOURNAL OF THE AMERICAN SOCIETY FOR PRECISION ENGINEERING, 1989, 11 (02) :79-82

[25] ELECTROCHEMICAL DISSOLUTION OF STAINLESS-STEELS IN FLOW CHANNEL CELLS WITH AND WITHOUT PHOTORESIST MASKS [J].

ROSSET, E ;

DATTA, M ;

LANDOLT, D .

JOURNAL OF APPLIED ELECTROCHEMISTRY, 1990, 20 (01) :69-76

[26] THEORETICAL AND EXPERIMENTAL MODELING OF SURFACE LEVELING IN ECM UNDER PRIMARY CURRENT DISTRIBUTION CONDITIONS [J].

SAUTEBIN, R ;

FROIDEVAUX, H ;

LANDOLT, D .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1980, 127 (05) :1096-1100

[27] SHAPE CHANGES DURING THROUGH-MASK ELECTROCHEMICAL MICROMACHINING OF THIN METAL-FILMS [J].

WEST, AC ;

MADORE, C ;

MATLOSZ, M ;

LANDOLT, D .

JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1992, 139 (02) :499-506

← 1 2 3 →