Monitoring mechanical damage in structural materials using complimentary NDE techniques based on thermography and acoustic emission

被引：147

作者：

Kordatos, E. Z. ^{[1
]}

Aggelis, D. G. ^{[1
]}

Matikas, T. E. ^{[1
]}

机构：

[1] Univ Ioannina, Dept Mat Sci & Engn, GR-45110 Ioannina, Greece

来源：

COMPOSITES PART B-ENGINEERING | 2012年 / 43卷 / 06期

关键词：

Metal-matrix composites (MMCs); Fracture; IR thermography; Non-destructive testing; Acoustic emission; GROWTH; FRAGMENTATION; STEEL;

D O I：

10.1016/j.compositesb.2011.12.013

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work deals with nondestructive evaluation (NDE) of the fracture behavior of metallic materials by combining thermographic and acoustic emission (AE) characterization. A new procedure, based on lock-in infrared (IR) thermography, was developed to determine the crack growth rate using thermographic mapping of the material undergoing fatigue. The thermography results on crack growth rate were found to be in agreement with measurements obtained by the conventional compliance method. Furthermore. acoustic emission was used to record different cracking events. The rate of incoming signals, as well as qualitative features based on the waveform shape, was correlated with macroscopically measured mechanical parameters, such as load and crack propagation rate. Additionally, since the failure modes have distinct AE signatures, the dominant active fracture mode was identified in real time. The application of combined NDE techniques is discussed for characterizing the damage process which leads to catastrophic failure of the material, thereby enabling life prediction in both monolithic aluminum alloys and aluminum alloy/SiC particle (SiCp) reinforced composites. (C) 2012 Elsevier Ltd. All rights reserved.

引用

页码：2676 / 2686

页数：11

共 39 条

[11] Bending Properties of Al-Steel and Steel-Steel Composite Metal Foams [J].

Brown, Judith A. ;

Vendra, Lakshmi J. ;

Rabiei, Afsaneh .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2010, 41A (11) :2784-2793

[12]

Choi M-Y, 2006, P 12 PCNDT 2006

[13] The measurement of fiber strength parameters in fragmentation tests by using acoustic emission [J].

Clough, RB ;

McDonough, WG .

COMPOSITES SCIENCE AND TECHNOLOGY, 1996, 56 (10) :1119-1127

[14]

Grosse CU., 2008, ACOUSTIC EMISSION TE, DOI 10.1007/978-3-540-69972-9

[15] Detecting and identifying artificial acoustic emission signals in an industrial fatigue environment [J].

Hensman, J. ;

Pullin, R. ;

Eaton, M. ;

Worden, K. ;

Holford, K. M. ;

Evans, S. L. .

MEASUREMENT SCIENCE AND TECHNOLOGY, 2009, 20 (04)

[16]

Kaiser J., 1950, Results and Conclusions from Measurements of Sound in Metallic Materials under Tensile Stress

[17]

Kim W-T, 2006, P 12 PCNDT 2006

[18] Developing damage metrics for metallic structures undergoing fatigue using real-time thermographic evaluation [J].

Kordatos, E. Z. ;

Matikas, T. E. .

SMART SENSOR PHENOMENA, TECHNOLOGY, NETWORKS, AND SYSTEMS 2011, 2011, 7982

[19]

Kordatos E. Z., 2009, Proceedings of the SPIE - The International Society for Optical Engineering, V7294, DOI 10.1117/12.815207

[20]

Krapez J-C, 2000, Quant. Infrared Thermogr, DOI 10.21611/qirt.2000.051

← 1 2 3 4 →