Effect of support surface on methane dry-reforming catalyst preparation

被引：92

作者：

Frontera, P. ^{[1
]}

Macario, A. ^{[2
]}

Aloise, A. ^{[2
]}

Antonucci, P. L. ^{[1
]}

Giordano, G. ^{[2
]}

Nagy, J. B. ^{[2
]}

机构：

[1] Mediterranea Univ, Dept Civil Engn Energy Environm & Mat, Reggio Di Calabria, Italy

[2] Univ Calabria, Dept Environm & Chem Engn, I-87036 Arcavacata Di Rende, CS, Italy

来源：

CATALYSIS TODAY | 2013年 / 218卷

关键词：

CH4 dry reforming; CO2; consumption; Nickel catalyst; ITQ-6; material; Silicalite-1; Coke formation; SYNTHESIS GAS; NATURAL-GAS; CO2; RESISTANCE; CONVERSION; ITQ-2; PHASE;

D O I：

10.1016/j.cattod.2013.04.029

中图分类号：

O69 [应用化学];

学科分类号：

081704 ;

摘要：

Present investigation shows the different catalytic behavior of Ni-supported catalysts in the dryreforming of methane. Highly ordered Silicalite-1, highly defective pure silica MCM-41 and pure silica delaminated zeolite ITQ-6 have been prepared and used as support for nickel deposition. The heterogeneity of the support surface strongly affects the nickel particles deposition. Delaminated surface of ITQ-6 material permits to obtain high nickel particles dispersion and high metal sintering resistance. The particles of Ni remain free from coke formation since they are very well dispersed and strongly linked to the support. Good overall catalytic performances was achieved by Ni-ITQ-6 catalyst, after 30h of reaction: ''80% of CH4 conversion, ''90% of CO2 conversion, H-2/CO molar ratio >1.3 and very low coke deposition, <4 wt.%. 2013 Elsevier B.V. All rights reserved.

引用

页码：18 / 29

页数：12

共 43 条

[11] Changing the hydroisomerization to hydrocracking ratio of long chain alkanes by varying the level of delamination in zeolitic (ITQ-6) materials [J].

Chica, Antonio ;

Diaz, Urbano ;

Fornes, Vicente ;

Corma, Avelino .

CATALYSIS TODAY, 2009, 147 (3-4) :179-185

[12] Energy-efficient syngas production through, catalytic oxy-methane reforming reactions [J].

Choudhary, Tushar V. ;

Choudhary, Vasant R. .

ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 2008, 47 (10) :1828-1847

[13] METHANE CONVERSION TO SYNTHESIS GAS BY PARTIAL OXIDATION AND DRY REFORMING OVER RHENIUM CATALYSTS [J].

CLARIDGE, JB ;

GREEN, MLH ;

TSANG, SC .

CATALYSIS TODAY, 1994, 21 (2-3) :455-460

[14]

Corma A, 2000, ANGEW CHEM INT EDIT, V39, P1499, DOI 10.1002/(SICI)1521-3773(20000417)39:8<1499::AID-ANIE1499>3.0.CO

[15]

2-0

[16] Preparation, characterisation and catalytic activity of ITQ-2, a delaminated zeolite [J].

Corma, A ;

Fornés, V ;

Guil, JM ;

Pergher, S ;

Maesen, TLM ;

Buglass, JG .

MICROPOROUS AND MESOPOROUS MATERIALS, 2000, 38 (2-3) :301-309

[17]

Corma A., 2000, World Patent, Patent No. [WO200007722-A, 0200007722]

[18] Bimetallic heterogeneous catalysts for hydrogen production [J].

Dal Santo, Vladimiro ;

Gallo, Alessandro ;

Naldoni, Alberto ;

Guidotti, Matteo ;

Psaro, Rinaldo .

CATALYSIS TODAY, 2012, 197 (01) :190-205

[19] MCM-41 supported PdNi catalysts for dry reforming of methane [J].

Damyanova, S. ;

Pawelec, B. ;

Arishtirova, K. ;

Fierro, J. L. G. ;

Sener, C. ;

Dogu, T. .

APPLIED CATALYSIS B-ENVIRONMENTAL, 2009, 92 (3-4) :250-261

[20]

Douglas D.L., 1963, FUEL CELLS, V2

← 1 2 3 4 5 →