Effect of ceramic coating thickness on residual stress and fatigue characteristic of 1Cr-1Mo-0.25V steel

To evaluate the effect of coatings on the fatigue behaviors of turbine rotor steel, TiN and TiAlN films were deposited on the 1Cr-1Mo-0.25V steels by arc-ion plating (AIP) method with and without screen ion filter. The coating thickness were varied with 2.5 mum, 3.5 mum, and 5.0 mum A Cu-Kalpha beam source was used as a characteristic X-ray and the crystal plane of (422) was selected to evaluate the residual stresses. In order to clear the relationship between fatigue behavior and residual stress of specimen coated with TiN and TiAlN films, the fatigue tests of specimens with and without coating were carried out at room temperatures respectively. It is shown that the fatigue life of the coated specimen was longer than that of uncoated specimen. The compressive residual stresses on the coatings were higher, and the fatigue crack initiated at an inclusion in the substrate near bond interface. It is known that compressive residual stress caused by hard coating would retard the fatigue crack initiation on the specimen surface, and then led to fatigue strength and fatigue life increasing.