Interface for coupling capillary electrophoresis to inductively coupled plasma and on-column concentration technique

A new interface for coupling capillary electrophoresis (CE) to inductively coupled plasma (ICP) was developed. The interface was built outside and independent of the nebulizer and could be easily connected with a microconcentric nebulizer (MCN) as well as conventional pneumatic nebulizers. An on-column concentration technique was used to increase the sensitivity and to enhance the resolution of the system of capillary electrophoresis-inductively coupled plasma atomic emission spectrometry (CE-ICP-AES). By doing this, it was possible to analyze 1 mu g/mL of total chromium (prepared with K2Cr2O7 and CrCl3) and 1 mu g/mL of copper consisting of CU2+ and Cu(EDTA)(2-) with good spectroscopic intensity and efficient separation. Detection limits of 18 elements for MCN-ICP-AES coupled with CE were assessed by continuous sample introduction without applying high voltage and were found to be 1-4 times higher than those typically obtained by using MCN-ICP-AES for elemental analysis (without connection to the CE interface). When the on-column concentration technique was used, the sensitivities and separations were further improved by increasing the amount of sample. A simple electrolyte (0.05 M HNO3) and a large inner diameter capillary (150 mu m) could also be used to attain efficient separation.