Defect structure of Ge(111)/cubic Pr2O3(111)/Si(111) heterostructures: Thickness and annealing dependence

The defect structure of Ge(111) epilayers grown by molecular beam epitaxy on cubic Pr2O3(111)/Si(111) support systems was investigated by means of transmission electron microscopy and laboratory-based x-ray diffraction techniques. Three main types of defects were identified, namely, rotation twins, microtwins, and stacking faults, and studied as a function of Ge film thickness and after annealing at 825 degrees C in ultrahigh vacuum. Rotation twins were found to be localized at the Ge(111)/cubic Pr2O3{11 (1) over bar} interface and their amount could be lowered by the thermal treatment. Microtwins across {11 (1) over bar} were detected only in closed Ge films, after Ge island coalescence. The fraction of Ge film volume affected by microtwinning is constant within the thickness range of similar to 20-260 nm. Beyond 260 nm, the density of microtwins is clearly reduced, resulting in thick layers with a top part of higher crystalline quality. Microtwins resulted insensitive to the postdeposition annealing. Instead, the density of stacking faults across {11 (1) over bar} planes decreases with the thermal treatment. In conclusion, the defect density was proved to diminish with increasing Ge thickness and after annealing. Moreover, it is noteworthy that the annealing generates a tetragonal distortion in the Ge films, which get in-plane tensely strained, probably due to thermal mismatch between Ge and Si. (C) 2009 American Institute of Physics. [doi: 10.1063/1.3224947]