A monolithic active pixel sensor for charged particle tracking and imaging using standard VLSI CMOS technology

A novel Monolithic Active Pixel Sensor (MAPS) for charged particle tracking made in a standard CMOS technology is proposed. The sensor is a photodiode, which is readily available in a CMOS technology. The diode has a special structure, which allows the high detection efficiency required for tracking applications. The partially depleted thin epitaxial silicon layer is used as a sensitive detector volume. Semiconductor device simulation, using either ToSCA based or 3-D ISE-TCAD software packages shows that the charge collection is efficient: reasonably fast (order of 100 ns), and the charge spreading limited to a few pixels only. A first prototype has been designed, fabricated and tested. It is made of four arrays each containing 64 x 64 pixels, with a readout pitch of 20 mum in both directions. The device is fabricated using standard submicron 0.6 mum CMOS process, which features twin-tub implanted in a p-type epitaxial layer, a characteristic common to many modern CMOS VLSI processes. Extensive tests made with soft X-ray source (Fe-55) and minimum ionising particles (15 GeV/c pions) fully demonstrate the predicted performances, with the individual pixel noise (ENC) below 20 electrons and the Signal-to-Noise ratio for both 5.9 keV X-rays and Minimum Ionising Particles (MIP) of the order of 30. This novel device opens new perspectives in high-precision vertex detectors in Particle Physics experiments, as well as in other application,like low-energy beta particle imaging, visible light single photon imaging (using the Hybrid Photon Detector approach) and high-precision slow neutron imaging. (C) 2001 Elsevier Science B.V. All rights reserved.