A method for using CPV modules as temperature sensors and its application to rating procedures

被引：46

作者：

Peharz, Gerhard ^{[1
]}

Ferrer Rodriguez, Juan P. ^{[1
]}

Siefer, Gerald ^{[1
]}

Bett, Andreas W. ^{[1
]}

机构：

[1] Fraunhofer Inst Solar Energy Syst, D-79102 Freiburg, Germany

来源：

SOLAR ENERGY MATERIALS AND SOLAR CELLS | 2011年 / 95卷 / 10期

关键词：

Concentrator photovoltaics; Characterization; Power rating;

D O I：

10.1016/j.solmat.2011.03.030

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

A method is presented herein that allows the determination of the average temperature of solar cells in a concentrator photovoltaic (CPV) module. The module is measured systematically in a sun simulator while the average module temperature and the irradiation are varied. Two different approaches are discussed to heat a CPV module in a sun simulator. From the measurements, a function is derived that allows the derivation of the average solar cell temperature when the I-V curve of the CPV module is measured. Consequently, the module itself can be used as a temperature sensor. Outdoor I-V measurements of different CPV modules are then presented. Their temperatures are calculated by applying the newly developed method. A multi-linear regression is conducted on the data measured outdoors. In particular, the modules' maximum powers are correlated to direct normal irradiation, the solar spectrum and the average solar cell temperature. The impact of temperature on the module's maximum power is shown to be significantly smaller than the impact of the solar spectrum. Finally, the maximum power values for the modules are re-calculated for two different rating conditions. (C) 2011 Elsevier B.V. All rights reserved.

引用

页码：2734 / 2744

页数：11

共 30 条

[21] A review and comparison of different methods to determine the series resistance of solar cells [J].

Pysch, D. ;

Mette, A. ;

Glunz, S. W. .

SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2007, 91 (18) :1698-1706

[22]

RUBIO F, 2008, P 33 IEEE PVSC SAN D

[23]

Siefer G, 2006, WORL CON PHOTOVOLT E, P745

[24] Experimental comparison between the power outputs of flatcono modules and silicon flat plate modules [J].

Siefer, G ;

Bett, AW .

CONFERENCE RECORD OF THE THIRTY-FIRST IEEE PHOTOVOLTAIC SPECIALISTS CONFERENCE - 2005, 2005, :643-646

[25]

SIEFER G, 2006, P 21 EUR PHOT SOL EN, P2101

[26]

SIEFER G, 2005, P 20 EUR PHOT SOL EN, P495

[27]

Sinton R.A., 2000, 16 EUR PHOT SOL EN C, P1152

[28] High-efficiency InGaP/In0.01Ga0.99As tandem solar cells lattice-matched to Ge substrates [J].

Takamoto, T ;

Agui, T ;

Ikeda, E ;

Kurita, H .

SOLAR ENERGY MATERIALS AND SOLAR CELLS, 2001, 66 (1-4) :511-516

[29] Current-voltage characteristics of high-concentration, photovoltaic arrays [J].

Vorster, FJ ;

van Dyk, EE .

PROGRESS IN PHOTOVOLTAICS, 2005, 13 (01) :55-66

[30]

Wolf M., 1963, ADV ENERG CONVERS, V3, P455, DOI [DOI 10.1016/0365-1789(63)90063-8, 10.1016/0365-1789(63)90063-8]

← 1 2 3 →