Electrokinetic control of fluid in plastified laser-printed poly(ethylene terephthalate)-toner microchips

被引:38
作者
He, FY
Liu, AL
Yuan, JH
Coltro, WKT
Carrilho, E
Xia, XH [1 ]
机构
[1] Nanjing Univ, Dept Chem, Key Lab Analyt Chem Life Sci, Nanjing 210093, Peoples R China
[2] Univ Sao Paulo, Inst Quim Sao Carlos, BR-13560970 Sao Carlos, SP, Brazil
基金
中国国家自然科学基金;
关键词
electrochemical detection; electrokinetic control; electrophoresis; PET; microchip;
D O I
10.1007/s00216-005-3200-x
中图分类号
Q5 [生物化学];
学科分类号
071010 ; 081704 ;
摘要
The application of plastified laser-printed poly(ethylene terephthalate)(PET)-toner microchips to capillary electrophoresis was investigated. Electroos-motic flow was observed in the direction of the cathode for the buffer system studied (phosphate, pH 3-10). Average electroosmotic mobilities of 1.71 x 10(-4) to 4.35 x 10(-4) cm(2) V-1 s(-1) were observed from pH 3 to 10. This variation suggests that silica fillers in the toner and on the surface of the polymer dominate the zeta potential of the material, which is also confirmed by XPS measurements. Dopamine and catechol were used as model analytes for microchip electrophoresis in combination with electrochemical detection. Results show that these two analytes can be efficiently separated and detected electrochemically with the plastified laser-printed PET-toner microchips.
引用
收藏
页码:192 / 197
页数:6
相关论文
共 30 条
[1]   Micro total analysis systems. 2. Analytical standard operations and applications [J].
Auroux, PA ;
Iossifidis, D ;
Reyes, DR ;
Manz, A .
ANALYTICAL CHEMISTRY, 2002, 74 (12) :2637-2652
[2]   Polyelectrolyte-modified short microchannel for cation separation [J].
Bai, XX ;
Roussel, C ;
Jensen, H ;
Girault, HH .
ELECTROPHORESIS, 2004, 25 (06) :931-935
[3]   Electrochemical detector for microchip electrophoresis of poly(dimethylsiloxane) with a three-dimensional adjustor [J].
Bao, N ;
Xu, JJ ;
Dou, YH ;
Cai, Y ;
Chen, HY ;
Xia, XH .
JOURNAL OF CHROMATOGRAPHY A, 2004, 1041 (1-2) :245-248
[4]   Polymer microfluidic devices [J].
Becker, H ;
Locascio, LE .
TALANTA, 2002, 56 (02) :267-287
[5]   Electrophoresis microchip fabricated by a direct-printing process with end-channel amperometric detection [J].
Coltro, WKT ;
da Silva, JAF ;
da Silva, HDT ;
Richter, EM ;
Furlan, R ;
Angnes, L ;
do Lago, CL ;
Mazo, LH ;
Carrilho, E .
ELECTROPHORESIS, 2004, 25 (21-22) :3832-3839
[6]   A dry process for production of microfluidic devices based on the lamination of laser-printed polyester films [J].
do Lago, CL ;
da Silva, HDT ;
Neves, CA ;
Brito-Neto, JGA ;
da Silva, JAF .
ANALYTICAL CHEMISTRY, 2003, 75 (15) :3853-3858
[7]   Rapid prototyping of microfluidic systems in poly(dimethylsiloxane) [J].
Duffy, DC ;
McDonald, JC ;
Schueller, OJA ;
Whitesides, GM .
ANALYTICAL CHEMISTRY, 1998, 70 (23) :4974-4984
[8]  
Gawron AJ, 2001, ELECTROPHORESIS, V22, P242, DOI 10.1002/1522-2683(200101)22:2<242::AID-ELPS242>3.0.CO
[9]  
2-W
[10]   CURRENT-MONITORING METHOD FOR MEASURING THE ELECTROOSMOTIC FLOW-RATE IN CAPILLARY ZONE ELECTROPHORESIS [J].
HUANG, XH ;
GORDON, MJ ;
ZARE, RN .
ANALYTICAL CHEMISTRY, 1988, 60 (17) :1837-1838