Enhanced cycling performance of silicon/disordered carbon/carbon nanotubes composite for lithium ion batteries

被引:25
作者
Zhou, Zhibin [1 ]
Xu, Yunhua [1 ]
Hojamberdiev, Mirabbos [1 ]
Liu, Wengang [1 ]
Wang, Juan [1 ]
机构
[1] Xian Univ Architecture & Technol, Sch Mat Sci & Engn, Xian 710055, Shaanxi, Peoples R China
关键词
Silicon; Disordered carbon; Carbon nanotubes; Anode material; ANODE MATERIALS; AMORPHOUS-SILICON; CARBON NANOTUBES; ALLOY ANODES; SI; GRAPHITE;
D O I
10.1016/j.jallcom.2010.07.188
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
A composite anode material of silicon/disordered carbon/carbon nanotubes (Si/DC/CNTs) was prepared by pyrolyzing the mixture of silicon (Si), carbon nanotubes (CNTs), and polyvinyl chloride (PVC) as carbon source. The X-ray diffraction (XRD) analysis confirmed that the phase transition of Si from crystalline to amorphous form occurred during the first cycle. The field-emission scanning electron microscopy (FESEM) observation revealed that Si particles wrapped by a CNTs network were homogeneously embedded into the carbonaceous matrix. The Si/DC/CNTs composite showed a discharge capacity of 1254 mAh/g in the first cycle, and a discharge capacity of 821 mAhig after 20 cycles, which is much higher than that of Si/DC composite (658 mAh/g). It was found that the excellent resiliency of the CNTs can assist the carbonaceous matrix derived from PVC to restore the volumetric changes of the Si. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码:309 / 311
页数:3
相关论文
共 23 条
  • [1] Single-electrode Peltier heats of Li-Si alloy electrodes in LiCl-KCl eutectic melt
    Amezawa, K
    Yamamoto, N
    Tomii, Y
    Ito, Y
    [J]. JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1998, 145 (06) : 1986 - 1993
  • [2] Amorphous silicon thin films as a high capacity anodes for Li-ion batteries in ionic liquid electrolytes
    Baranchugov, V.
    Markevich, E.
    Pollak, E.
    Salitra, G.
    Aurbach, D.
    [J]. ELECTROCHEMISTRY COMMUNICATIONS, 2007, 9 (04) : 796 - 800
  • [3] Will advanced lithium-alloy anodes have a chance in lithium-ion batteries?
    Besenhard, JO
    Yang, J
    Winter, M
    [J]. JOURNAL OF POWER SOURCES, 1997, 68 (01) : 87 - 90
  • [4] Amorphous silicon as a possible anode material for Li-ion batteries
    Bourderau, S
    Brousse, T
    Schleich, DM
    [J]. JOURNAL OF POWER SOURCES, 1999, 81 : 233 - 236
  • [5] Enhanced reversible lithium storage in a nanosize silicon/graphene composite
    Chou, Shu-Lei
    Wang, Jia-Zhao
    Choucair, Mohammad
    Liu, Hua-Kun
    Stride, John A.
    Dou, Shi-Xue
    [J]. ELECTROCHEMISTRY COMMUNICATIONS, 2010, 12 (02) : 303 - 306
  • [6] Silicon, graphite and resin based hard carbon nanocomposite anodes for lithium ion batteries
    Datta, Moni Kanchan
    Kumta, Prashant N.
    [J]. JOURNAL OF POWER SOURCES, 2007, 165 (01) : 368 - 378
  • [7] Silicon and carbon based composite anodes for lithium ion batteries
    Datta, Moni Kanchan
    Kumta, Prashant N.
    [J]. JOURNAL OF POWER SOURCES, 2006, 158 (01) : 557 - 563
  • [8] Mixed silicon-graphite composites as anode material for lithium ion batteries influence of preparation conditions on the properties of the material
    Dimov, N
    Kugino, S
    Yoshio, A
    [J]. JOURNAL OF POWER SOURCES, 2004, 136 (01) : 108 - 114
  • [9] Towards creating reversible silicon-based composite anodes for lithium ion batteries
    Dimov, N.
    Yoshio, M.
    [J]. JOURNAL OF POWER SOURCES, 2007, 174 (02) : 607 - 612
  • [10] Structural and electrochemical properties of disordered carbon prepared by the pyrolysis of poly(p-phenylene) below 1000°C for the anode of a lithium-ion battery
    Gong, JB
    Wu, HQ
    Yang, QH
    [J]. CARBON, 1999, 37 (09) : 1409 - 1416