Ultrafast superconducting single-photon optical detectors and their applications

We present a new class of ultrafast single-photon detectors for counting both visible and infrared photons. The detection mechanism is based on photon-induced hotspot formation, which forces the supercurrent redistribution and leads to the appearance of a transient resistive barrier across an ultrathin, submicrometer-width, superconducting stripe; The devices were fabricated from 3.5-nm- and 10-nm-thick NbN films, patterned into <200-nm-wide stripes in the 4 x 4-mum(2) or 10 x 10-mum(2) meander-type geometry, and operated at 4.2 K, well below the NbN critical temperature (T-c = 10-11 K). Continuous-wave and pulsed-laser optical sources in the 400-mm-to 3500-nm-wavelength range were used to determine the detector performance in the photon-counting mode. Experimental quantum efficiency was found to exponentially depend on the photon wavelength, and for our best, 3.5-nm-thick, 100-mum(2)-area devices varied from >10% for 405-nm radiation to 3.5% for 1550-nm photons. T he detector response time and jitter were similar to100 ps and 35 ps, respectively, and were acquisition system limited. The dark counts Were below 0.01 per second at optimal biasing. In terms of the counting rate, jitter, and dark counts, the NbN single-photon detectors significantly outperform their semiconductor counterparts. Already-identified applications for our devices range from noncontact testing of semiconductor CMOS VLSI circuits to free-space quantum cryptography and communications.