Stability of the bulk glass-forming Mg65Y10Cu25 alloy in aqueous electrolytes

被引：75

作者：

Gebert, A ^{[1
]}

Wolff, U ^{[1
]}

John, A ^{[1
]}

Eckert, J ^{[1
]}

Schultz, L ^{[1
]}

机构：

[1] IFW Dresden, Inst Met Werkstoffe, D-01171 Dresden, Germany

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2001年 / 299卷 / 1-2期

关键词：

bulk metallic glass; magnesium alloy; corrosion; polarisation;

D O I：

10.1016/S0921-5093(00)01401-5

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The corrosion behaviour of the amorphous Mg65Y10Cu25, alloy was studied in aqueous alkaline electrolytes and compared with that of the corresponding multiphase crystalline alloy and of magnesium. Alloy samples were prepared by melt-spinning and die-casting and characterised concerning their microstructure and thermal stability by X-ray diffraction, optical and scanning electron microscopy and differential scanning calorimetry. In 0.3 m H3BO3/Na2B4O7 buffer solution with pH = 8.4 and 0.1 m NaOH solution with pH=13 the samples were electrochemically investigated by recording Tafel plots and by performing potentiodynamic polarisation tests and current transient measurements at anodic potentials. Potentiostatically formed surface layers were characterised with Auger electron spectroscopy and scanning electron microscopy. For both, the amorphous and the multiphase crystalline Mg-Y-Cu alloy, differences in anodic surface layer growth mechanisms in the two investigated electrolytes were detected which are explained by the effect of the constituent copper. In the two electrolytes, the amorphous ahoy showed the lowest corrosion rates and the highest passivation ability also in comparison with earlier investigated Mg-Y alloys. Differences between the corrosion behaviour of the amorphous and the multiphase crystalline alloy are mainly attributed to heterogeneity effects rather than to an effect of the amorphous structure. (C) 2001 Elsevier Science B.V. All rights reserved.

引用

页码：125 / 135

页数：11

共 37 条

[11] MG-CU-Y BULK AMORPHOUS-ALLOYS WITH HIGH-TENSILE STRENGTH PRODUCED BY A HIGH-PRESSURE DIE-CASTING METHOD [J].

INOUE, A ;

NAKAMURA, T ;

NISHIYAMA, N ;

MASUMOTO, T .

MATERIALS TRANSACTIONS JIM, 1992, 33 (10) :937-945

[12]

INOUE A, 1998, MAT SCI FDN T TECH P, V4

[13] CHEMICAL-REACTIVITY OF AMORPHOUS-ALLOYS [J].

JANIKCZACHOR, M .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 179 :142-146

[14] The effect of heat treatment on the corrosion behavior of amorphous Mg-Ni-Nd alloys [J].

Kam, CH ;

Li, Y ;

Ng, SC ;

Wee, A ;

Pan, JS ;

Jones, H .

JOURNAL OF MATERIALS RESEARCH, 1999, 14 (04) :1638-1644

[15]

Koster U., 1997, Rapidly Quenched and Metastable Materials. Proceedings of the Ninth International Conference on Rapidly Quenched and Metastable Materials. Supplement, P368

[16]

KRASNOYARSKII VV, 1991, ZASHCH MET, V27, P922

[17] CORROSION BEHAVIOR OF RAPIDLY SOLIDIFIED MG-ND AND MG-Y ALLOYS [J].

KRISHNAMURTHY, S ;

KHOBAIB, M ;

ROBERTSON, E ;

FROES, FH .

MATERIALS SCIENCE AND ENGINEERING, 1988, 99 :507-511

[18]

LATANISION RM, 1980, P 3 INT C MECH BEH M, V2, P475

[19] THIN ANODIC OXIDE LAYERS ON ALUMINUM AND OTHER VALVE METALS - HIGH-FIELD REGIME [J].

LOHRENGEL, MM .

MATERIALS SCIENCE & ENGINEERING R-REPORTS, 1993, 11 (06) :243-294

[20]

MAKAR GL, 1993, INT MATER REV, V38, P138, DOI 10.1179/095066093790326320

← 1 2 3 4 →