Comparative study of the tribological behaviour of superhard nanocomposite coatings nc-TiN/a-Si3N4 with TiN

被引：98

作者：

Ma, S

Procházka, J

Karvánková, P

Ma, Q

Niu, X

Wang, X

Ma, D

Xu, K

Veprek, S

机构：

[1] Tech Univ Munich, Inst Chem Inorgan Mat, D-85747 Garching, Germany

[2] Xi An Jiao Tong Univ, State Key Lab Mech Behav Mat, Xian 710049, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2005年 / 194卷 / 01期

基金：

中国国家自然科学基金;

关键词：

superhard nanocomposite coatings; friction coefficient; hardness;

D O I：

10.1016/j.surfcoat.2004.05.007

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Superhard nanocomposite nc-TiN/a-Si3N4 coatings were prepared by reactive magnetron sputtering (RMS) and pulsed dc plasma-induced chemical vapour deposition (PCVD) on stainless steel substrates. The tribological behaviour of these coatings at room and elevated temperature was compared with that of TiN coatings deposited by RMS and PCVD. The results show that the superhard nanocomposite nc-TiN/a-Si3N4 coatings have a somewhat higher friction coefficient of 0.55-0.7 at room temperature that decreases to about 0.4-0.5 at 550 degrees C. However, the friction coefficient of pure TiN coatings is 0.6 at room temperature and increases to 0.7 after a sliding distance of 0.1 km at 550 degrees C. (c) 2004 Elsevier B.V All rights reserved.

引用

页码：143 / 148

页数：6

共 36 条

[21]

PROCHAZKA J, 2003, THESIS TU MUNICH

[22]

PROCHAZKA J, 2003, IN PRESS MAT SCI ENG

[23]

QIAOQIN Y, 1997, T NONFERR METAL SOC, V7, P97

[24] Structure, mechanical and tribological properties of Ti-B-N and Ti-Al-B-N multiphase thin films produced by electron-beam evaporation [J].