In-vitro corrosion and wear of titanium alloys in the biological environment

Cyclic anodic polarization studies were undertaken for several titanium alloys of varying composition and phase structures. All materials were exposed to an accelerated corrosion test using a potentiostat and their electrochemical behaviour was analysed within a potential range of 0 to 5000 mV. The electrolyte used was a phosphate buffered saline (PBS) solution at pH = 5, 7.4 and 9. The polarization curves obtained represented both the passive and active regions of the materials and these curves were used to compare the resistance to pitting corrosion of each material. The sliding-wear of these materials was studied in both non-corrosive and corrosive environments. A simple pin-on-disc type wear apparatus was designed and built to simulate the co-joint action of corrosion and sliding-wear. Using this apparatus, it was also possible to evaluate the effect of wear-accelerated corrosion, which was also evaluated by wearing the surface of the specimens prior to corrosion. It was evident that the mixed phase alpha-beta alloys (Ti-6Al-4V and Ti-6Al-7Nb) possessed the best combination of both corrosion and wear resistance, although commercially pure titanium and the near-beta (Ti-13Nb-13Zr) and beta (Ti-15Mo) alloys displayed the best corrosion resistant properties. (C) 1996 Elsevier Science Limited