Surface acoustic wave humidity sensors based on poly (p-diethynylbenzene) and sodium poly sulfone sulfonate

被引:23
作者
Li, Yang [1 ]
Yang, Mujie
Ling, Mingfang
Zhu, Yunhai
机构
[1] Zhejiang Univ, Dept Polymer Sci & Engn, Hangzhou 310027, Peoples R China
[2] Zhejiang Univ, Dept Elect & Informat, Hangzhou 310027, Peoples R China
关键词
poly(p-diethynylbenzene); sodium polysulfonesulfonate; surface acoustic wave; humidity sensor;
D O I
10.1016/j.snb.2006.06.031
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
Surface acoustic wave (SAW) humidity sensors have been constructed by using poly(p-diethynylbenzene) (PDEB) and sodium polysulfone-sulfonate (NaSPF) as the sensitive film. The 138 MHz SAW sensors were configured as a delay line onto a 128 degrees YX-LiNbO3 substrate with the SAW path covered by the LB membrane of PDEB and the spin-coated NaSPF film. The frequency responses of the SAW sensors have been investigated over the range of relative humidity (RH) of 20-85% at different temperatures. It is found that the temperature has a great influence on the frequency shift of the SAW sensors. The PDEB and NaSPF based SAW sensors exhibit a decreased frequency with an increase in humidity, and the sensitivity is found to be -0.4 and -1.1 kHz/%RH, respectively. The effect of chemical structure on the sensing characteristics has also been discussed. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码:560 / 563
页数:4
相关论文
共 17 条
[1]   Response of a Pt-polyyne membrane in surface acoustic wave sensors: Experimental and theoretical approach [J].
Caliendo, C ;
Fratoddi, I ;
Russo, MV ;
Lo Sterzo, C .
JOURNAL OF APPLIED PHYSICS, 2003, 93 (12) :10071-10077
[2]   Sensitivity of a platinum-polyyne-based sensor to low relative humidity and chemical vapors [J].
Caliendo, C ;
Fratoddi, I ;
Russo, MV .
APPLIED PHYSICS LETTERS, 2002, 80 (25) :4849-4851
[3]   A NEW SURFACE-ACOUSTIC-WAVE HUMIDITY SENSOR-BASED ON A POLYETHYNYLFLUORENOL MEMBRANE [J].
CALIENDO, C ;
VERONA, E ;
DAMICO, A ;
FURLANI, A ;
IUCCI, G ;
RUSSO, MV .
SENSORS AND ACTUATORS B-CHEMICAL, 1994, 18 (1-3) :82-84
[4]   SAW sensors for the room-temperature measurement of CO2 and relative humidity [J].
Hoyt, AE ;
Ricco, AJ ;
Bartholomew, JW ;
Osbourn, GC .
ANALYTICAL CHEMISTRY, 1998, 70 (10) :2137-2145
[5]  
LING MF, 1993, SENSOR ACTUAT B-CHEM, V12, P53, DOI 10.1016/0925-4005(93)85014-2
[6]   MEASUREMENT OF HUMIDITY USING SURFACE ACOUSTIC-WAVE DEVICE [J].
NOMURA, T ;
OOBUCHI, K ;
YASUDA, T ;
FURUKAWA, S .
JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, 1992, 31 (9B) :3070-3072
[7]   SAW chemical sensing using poly-ynes and organometallic polymer films [J].
Penza, A ;
Cassano, G ;
Sergi, A ;
Lo Sterzo, C ;
Russo, M .
SENSORS AND ACTUATORS B-CHEMICAL, 2001, 81 (01) :88-98
[8]   Carbon nanotubes as SAW chemical sensors materials [J].
Penza, M ;
Antolini, F ;
Antisari, MV .
SENSORS AND ACTUATORS B-CHEMICAL, 2004, 100 (1-2) :47-59
[9]   Surface acoustic wave humidity sensor using polyvinyl-alcohol film [J].
Penza, M ;
Anisimkin, VI .
SENSORS AND ACTUATORS A-PHYSICAL, 1999, 76 (1-3) :162-166
[10]   Pore-bridging poly(dimethylsiloxane) membranes as selective interfaces for vapor-phase chemical sensing [J].
Perez, GP ;
Crooks, RM .
ANALYTICAL CHEMISTRY, 2004, 76 (14) :4137-4142