Fabrication of dissolved O2 metric uric acid biosensor using uricase epoxy resin biocomposite membrane

Uricase purified from 20-day-old leaves of cowpea was immobilized on to epoxy resin membrane with 80% retention of initial activity of free enzyme and a conjugation yield of 0.056 mg/cm(2). The uricase epoxy resin bioconjugate membrane was mounted over the sensing part of the combined electrode of 'Aqualytic' dissolved O-2. (DO) meter to construct a uric acid biosensor. The biosensor measures the depletion of dissolved O-2 during the oxidation of uric acid by immobilized uricase, which is directly proportional to uric acid concentration. The biosensor showed optimum response within 10-12 s at a pH 8.5 and 35 degrees C. A linear relationship was found between uric acid concentration from 0.025 to 0.1 mM and O-2 (mg/l) consumed. The biosensor was employed for measurement of uric acid in serum. The mean value of uric acid in serum was 4.92 mg/dl in apparently healthy males and 3.11 mg/dl in apparently healthy females. The mean analytic recoveries of added uric acid in reaction mixture (8.9 and 9.8 mg/dl) were 93.6 +/- 2.34 and 87.18 +/- 3.17% respectively. The within and between batch CVs were <6.5 and <5.0%, respectively. The serum uric acid values obtained by present method and standard enzymic colorimetric method, showed a good correlation (r = 0.996) and regression equation being y = 0.984x + 0.0674. Among the various metabolites tested only, glucose (11%). urea (38%), NaCl (25%) and cholesterol (13%) and ascorbic acid (56%) caused decrease, while, MgSO4 and CaCl2 had no effect on immobilized enzyme. The enzyme electrode showed only 32% decrease during its use for 100 times over a period of 60 days at 4 degrees C. (C) 2009 Elsevier B.V. All rights reserved.